User Manual


PAN1322-SPP
ENW89841A3KF
User’s Manual 22 Revision 1.3, 2013-08-14
Hardware Description
Electrical Characteristics
7.3 DC Characteristics
7.3.1 Pad Driver and Input Stages
For more information, see Chapter 1.4.
Values
-0.3 – 0.27 V –
1.15 – 3.6 V –
– – 0.25 V IOL = 1 mA
1.1 – – V IOH = -1 mA
– – 1 mA –
– – 10 pF –
– 0.01 1 μA Input and output drivers
disabled
Values
-0.3 – 0.45 V –
1.93 – 2.8 V P0.10
1.93 – 3.6 V Other pins
– – 0.25 V IOL = 5 mA
– – 0.15 V IOL = 2 mA
2.0 – – V IOH = -5 mA
2.1 – – V IOH = -2 mA
– – 5 mA –
– – 10 pF –
– 0.01 1 μA Input and output drivers
disabled
Table 7 Internal1 (1.5 V) Supplied Pins
Parameter Symbol
Unit Note / Test Condition
Min. Typ. Max.
Input low voltage
Input high voltage
Output low voltage
Output high voltage
Continuous Load
1)
1) The totaled continuous load for all Internal1 supplied pins shall not exceed 2mA at the same time
Pin Capacitance
Magnitude Pin Leakage
Table 8 Internal2 (2.5 V) Supplied Pins
Parameter Symbol
Unit Note / Test Condition
Min. Typ. Max.
Input low voltage
Input high voltage
Input high voltage
Output low voltage
Output low voltage
Output high voltage
Output high voltage
Continuous Load
1)
1) The totaled continuous load for all Internal2 supplied pins shall not exceed 35 mA at the same time
Pin Capacitance
Magnitude Pin Leakage
Table 9 VDDUART Supplied Pins
Parameter Symbol
Values Unit Note / Test Condition
Min. Typ. Max.
Input low voltage
-0.3 – 0.2*VDDUART V –
Input high voltage 0.7*VDDUART – VDDUART+0.3 V P0.5/UARTRXD
Input high voltage 0.7*VDDUART – 3.6 V Other pins