User Manual

User’s Manual 25 Revision 1.3, 2013-08-14
Hardware Description

PAN1322-SPP
ENW89841A3KF
Electrical Characteristics
7.3.4 System Power Consumption
Values
– – 100 mA Peak current
Note: I/O currents are not included since they depend mainly on external loads. For more details see [2].
7.4 RF Part
7.4.1 Characteristics RF Part
The characteristics involve the spread of values to be within the specific temperature range. Typical characteristics
are the median of the production.
All values refers to Panasonic reference design.
7.4.1.1 Bluetooth Related Specifications
Table 13 Max. Load at the Different Supply Voltages
Parameter Symbol
Unit Note / Test Condition
Min. Typ. Max.
Vsupply
Table 14 BDR - Transmitter Part
Parameter Symbol
Values Unit Note / Test Condition
Min. Typ. Max.
Output power (high gain)
0.5 2.5 4.5 dBm Default settings
Output power (highest gain) – 4.5 – dBm Maximum settings
Power control step size 4 6 8 dB –
Frequency range fL 2400 2401.3 – MHz –
Frequency range fH – 2480.7 2483.5 MHz –
20 dB bandwidth – 0.930 1 MHz –
2nd adjacent channel power – -40 -20 dBm –
3rd adjacent channel power – -60 -40 dBm –
>3rd adjacent channel power – -64 -40 dBm Max. 2 of 3 exceptions @
52
MHz offset might be used
Average modulation deviation
for 00001111 sequence
140 156 175 kHz –
Minimum modulation deviation
for 01010101 sequence
115 145 – kHz –
Ratio Deviation 01010101 /
Deviation 00001111
0.8 1 – –
Initial carrier frequency
tolerance |foffset|
– – 75 kHz –
Carrier frequency drift
(one slot) |fdrift|
– 10 25 kHz –
Carrier frequency drift
(three slots) |fdrift|
– 10 40 kHz –