User Manual
Table Of Contents
- 1 General Device Overview
- 2 Basic Operating Information
- 3 PAN1322-SPP Interfaces
- 4 General Device Capabilities
- 5 Ordering Information
- 6 Bluetooth Capabilities
- 7 Electrical Characteristics
- 8 Package Information
- 9 Bluetooth Qualification and Regulatory Certification
- 9.1 Reference Design
- 9.2 FCC Class B Digital Devices Regulatory Notice
- 9.3 FCC Wireless Notice
- 9.4 FCC Interference Statement
- 9.5 FCC Identifier
- 9.6 European R&TTE Declaration of Conformity
- 9.7 Bluetooth Qualified Design ID
- 9.8 Industry Canada Certification
- 9.9 Label Design of the Host Product
- 9.10 Regulatory Test House
- 10 Assembly Guidelines
- 11 Terminology
- 12 References
PAN1322-SPP
ENW89841A3KF
User’s Manual 36 Revision 1.3, 2013-08-14
Hardware Description
Bluetooth Qualification and Regulatory Certification
9.7 Bluetooth Qualified Design ID
Panasonic has submitted End Product Listing (EPL) for PAN1322, based on Intel eBMU plattform, in the Qualified
Product List of the Bluetooth SIG. These EPL are referring the Bluetooth qualfication of the SPP-AT application
running on the eBMU chip under QD ID B021246.
Manufacturers of Bluetooth devices incorporating PAN1322 can reference the same QD ID number.
Bluetooth QD ID: B021246 (PAN1322 SPP BT2.1).
9.8 Industry Canada Certification
PAN1322 complies with the regulatory requirements of Industry Canada (IC), license: IC: 216Q-EBMU
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory
questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on
RF exposure and compliance from www.ic.gc.ca.
This device has been designed to operate with the built in antenna. It is not allowed to alter the antenna or connecting an
external antenna to the module. The built in antenna used for this transmitter must not be collocated or operating
in conjunction
with any other antenna or transmitter.
9.9 Label Design of the Host Product
It is recommended to include the following information on the host product label:
Contains transmitter Module FCC ID: T7VEBMU / IC: 216QEBMU
9.10 Regulatory Test House
The test house used by Panasonic in the Bluetooth and Regulatory approvals for the module PAN1322:
Eurofins Product Service GmbH
Storkower Str. 38c
D-15526 Reichenwalde b. Berlin
GERMANY
Tel.: +49 33631 888 0
Fax: +49 33631 888 650
www.eurofins.com