User's Manual

CLASSIFICATION
Einstufung
PRODUCT SPECIFICATION
Produktspezifikation
No.
DS-ETR2-2400-102
REV.
D
SUBJECT
Thema
MODEM FOR IEEE802.15.4 (ZIGBEE)
“ZigBee” Modem“ (IEEE802.15.4)
PAGE
Seite 18 of 29
CUSTOMER’S CODE
ETRX2
PANASONIC’S CODE
ENWC9A0xyzE
DATE
Datum
01.08.2006
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
19. LABELING DRAWING
Kennzeichnung des Moduls durch Label
FCC ID: T7VEM250A
The label dimensions are 13,0mm x 18,5
mm. It is suited for reflow soldering.
Imprint
Aufdruck
Description
Beschreibung
ETRX2
This is the marketing name from Telegesis, the ENW number is only integrated in the 2D
Code and marked with the Z
Date Code Production Date Code in the format YYMMDD, e.g. 060602
01
Indication for software revision for our final test, customer are able to flash there own
software.
01Z
Indication for the hardware revision, Z indicates the ES status, will be removed after MP
ready.
0000001 Indication for the serial number.
FCC ID:
T7VEM250A
This is the FCC ID, should be labelled only after FCC approval.
2D-Barcode
Information in the 2D-Barcode are the serial number [7 signs], the ENW-Part-Number [11
signs], identifier for the software release [2 signs], the identifier for the hardware release [2
signs] and the production date code in the format Year-Month-Day [6 signs], separated by a
semicolon.
The IEEE802.15.4 MAC Address [12 characters] are stored in the EM250, therefore it could
not be on the label, but must be stored in the excel sheet to have a reference betweeen MAC
address and serial number.
20. RECOMMENDED LAND PATTERN
Empfohlenes Land Pattern
This part will be included in next revisions.