User's Manual
Table Of Contents
- KEY FEATURES
- APPLICATIONS FOR THE MODULE
- DESCRIPTION OF THE MODULE
- SCOPE OF THIS DOCUMENT
- HISTORY FOR THIS DOCUMENT
- TERMINAL LAYOUT
- BLOCK DIAGRAM
- KEY PARTS LIST
- TEST CONDITIONS
- ABSOLUTE MAXIMUM RATINGS
- OPERATING CONDITIONS
- DC ELECTRICAL CHARACTERISTICS
- A/D CONVERTER CHARACTERISTICS
- AC ELECTRICAL CHARACTERISTICS
- MECHANICAL REQUIREMENTS
- SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING)
- MODULE DIMENSIONS
- FOOT PRINT OF THE MODULE
- LABELING DRAWING
- RECOMMENDED LAND PATTERN
- SOFTWARE
- RELIABILITY TESTS
- APPLICATION NOTES
- PACKAGING
- ORDERING INFORMATION
- ROHS DECLARATION
- DATA SHEET STATUS
- REGULATORY INFORMATION
- RELATED DOCUMENTS
- GENERAL INFORMATION
- LIFE SUPPORT POLICY
CLASSIFICATION
Einstufung
PRODUCT SPECIFICATION
Produktspezifikation
No.
DS-ETR2-2400-102
REV.
D
SUBJECT
Thema
MODEM FOR IEEE802.15.4 (ZIGBEE)
“ZigBee” Modem“ (IEEE802.15.4)
PAGE
Seite
19 of 29
CUSTOMER’S CODE
ETRX2
PANASONIC’S CODE
ENWC9A0xyzE
DATE
Datum
01.08.2006
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
21. SOFTWARE
Software
21.1. SOFTWARE DECLARATION
With the signature on the front page, customer clearly understand and agreed that
the software, which is included in the module is only for testing purpose and
Panasonic deny any responsibility for product liability, related to software matters.
21.2. SOFTWARE TOOLS
In order to develop code and ZigBee
TM
networks the Ember Insight Desktop Development
Environment is required. This environment works with the preceeding EM2420, the EM250
and the upcoming EM260. For code development it comprises the Integrated Development
Environment (IDE) named xIDE based on eclipse 3.1.0 for editing, compiling and
debugging of C–applications. In addition network visualization and debugging tools are
included.
For programming the Ember Insight Adapter is required. This adaptor has to be linked to
the computer where the Ember Insight Desktop is installed on over an Ethernet network
connection. Before connecting ETRX2 to the Ember Insight Adaptor study the latest
Ember Insight Adaptor documentation. The following pins of ETRX2 have to be connected
to the signals on the debug connector of the Ember Insight adaptor:
ETRX2 pin ETRX2 signal name Insight Adapter signal name
various ground ground
7(10)
(1)
VBAT 3.0Vdc
24(14) RESET RSTB
16 SIF_CLK SIF_CLK
17 SIF_MISO SIF_MISO
18 SIF_MOSI SIF_MOSI
19 SIF_LOADB SIF_LOADB
as packet trace interface (PTI) also connect the following signals:
9(4) GPIO4 GPIO4
10(5) GPIO5 GPIO5
Note:
(1) Only if the Ember Insight Adaptor is set to powering the target device ETRX2.
The pin numbers in brackets () are the related pins of the pin/header connector X5,
which is only mounted for special plug versions.