User's Manual

CLASSIFICATION
Einstufung
PRODUCT SPECIFICATION
Produktspezifikation
No.
DS-ETR2-2400-102
REV.
D
SUBJECT
Thema
MODEM FOR IEEE802.15.4 (ZIGBEE)
“ZigBee” Modem“ (IEEE802.15.4)
PAGE
Seite 8 of 29
CUSTOMER’S CODE
ETRX2
PANASONIC’S CODE
ENWC9A0xyzE
DATE
Datum
01.08.2006
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
Pin
No.
Pin
Name
Signal
Name
Pin
Type
Description
10(5) GPIO5
GPIO5
ADC1
PTI_DATA
I/O
Analog
O
Digital I/O
ADC Input 1
Data signal of Packet Trace Interface (PTI)
11(6) GPIO3
GPIO3
SSEL
TMR1IB.1
I/O
I
I
Digital I/O
SPI slave select of Serial Controller SC2
Capture Input B of Timer 1
12(7) GPIO2
GPIO2
MSCLK
MSCLK
SCL
TMR2IB.2
I/O
O
I
I/O
I
Digital I/O
SPI master clock of Serial Controller SC2
SPI slave clock of Serial Controller SC2
I
2
C clock of Serial Controller SC2
Capture Input B of Timer 2
13(8) GPIO1
GPIO1
MISO
MISO
SDA
TMR2IA.2
I/O
I
O
I/O
I
Digital I/O
SPI master data in of Serial Controller SC2
SPI slave data out of Serial Controller SC2
I
2
C data of Serial Controller SC2
Capture Input A of Timer 2
14(9) GPIO12
GPIO12
RTS
TMR2IB.1
I/O
O
I
Digital I/O
UART RTS handshake of Serial Controller SC1
Capture Input B for Timer 2
15 GND4 GND I/O
ground
16 SIF_CLK SIF_CLK I
Serial interface, clock (internal pull-down)
17 SIF_MISO SIF_MISO O
Serial interface, master in / slave out
18 SIF_MOSI SIF_MOSI I
Serial interface, master out / slave in
19 SIF_LOADB SIF_LOADB I/O
Serial interface, load strobe (open-collector with internal pull-
up)
20 GND5 GND I/O
ground
21(11) GPIO6
GPIO6
ADC2
TMR2CLK
TMR1ENMSK
I/O
Analog
I
I
Digital I/O
ADC Input 2
External clock input of Timer 2
External enable mask of Timer 1
22(12) GPIO11
GPIO11
CTS
MCLK
TMR2IA.1
I/O
I
O
I
Digital I/O
UART CTS handshake of Serial Controller SC1
SPI master clock of Serial Controller SC1
Capture Input A of Timer 2
23(13) GPIO13
GPIO13
TMR2OA
TMR1IA.3
I/O
O
I
Digital I/O
Waveform Output A of Timer 2
Capture Input A of Timer 1
24(14) RESET RESET I
active low module reset (internal pull-up)
25(15) GPIO14
GPIO14
TMR2OB
TMR1IB.3
IRQB
I/O
O
I
I
Digital I/O
Waveform Output B of Timer 2
Capture Input B of Timer 1
External interrupt source B
26(16)
GPIO8
VREF_OUT
I/O
Analo
g
Digital I/O
ADC reference output