User's Manual

CLASSIFICATION
Einstufung
PRODUCT SPECIFICATION
Produktspezifikation
No.
DS-ETR2-2400-102
REV.
D
SUBJECT
Thema
MODEM FOR IEEE802.15.4 (ZIGBEE)
“ZigBee” Modem“ (IEEE802.15.4)
PAGE
Seite 9 of 29
CUSTOMER’S CODE
ETRX2
PANASONIC’S CODE
ENWC9A0xyzE
DATE
Datum
01.08.2006
HIGH FREQUENCY PRODUCTS DIVISION
Module Business
PANASONIC ELECTRONIC DEVICES
(EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
erstellt
Pin
No.
Pin
Name
Signal
Name
Pin
Type
Description
GPIO8 TMR1CLK
TMR2ENMSK
IRQA
I
I
I
External clock input of Timer 1
External enable mask of Timer 2
External interupt source A
27(18) GPIO9
GPIO9
TXD
MO
MSDA
TMR1IA.2
I/O
O
O
I/O
I
Digital I/O
UART transmit data of Serial Controller SC1
SPI master data out of Serial Controller SC1
I
2
C data of Serial Controller SC2
Capture Input A of Timer 1
28(17) GPIO10
GPIO10
RXD
MI
MSCL
TMR1IB.2
I/O
I
I
I/O
I
Digital I/O
UART receive data of Serial Controller SC1
SPI master data in of Serial Controller SC1
I
2
C clock of Serial Controller SC1
Capture Input B of Timer 2
29 GND6 GND I/O ground
30(19) GPIO15
GPIO15
TMR1OA
TMR2IA.3
IRQC
I/O
O
I
I
Digital I/O
Waveform Output A of Timer 1
Capture Input A of Timer 2
External interrupt source C
31(20) GPIO16
GPIO16
TMR1OB
TMR2IB.3
IRQD
I/O
O
I
I
Digital I/O
Waveform Output B of Timer 1
Capture Input B of Timer 2
External interrupt source D
32 GND7 GND I/O ground
33 VC1 TX_ACTIVE O Logic-level control for external Rx/Tx switch
34 GND8 GND I/O ground
35 GND9 GND I/O ground
36 GND10 GND I/O ground
37 GND11 GND I/O ground
38 GPIO7
GPIO7
ADC3
REG_EN
I/O
Analog
O
Digital I/O
ADC Input 3
External regulator open collector output
Notes:
(1) In case the onboard regulator option is mounted this pin is connected to the output voltage of the
onboard regulator option and NOT to the output voltage VREG_OUT of the EM250.