P-04C INSTRUCTION MANUAL ’11.
Thank you for selecting the “docomo STYLE series P-04C”. Read this manual before use to correctly operate your P-04C. About manual of P-04C Basic Package The operating procedures for the P-04C are also published as in P-04C Handset Instruction Manual (With Warranty and Back Cover P49) (Japanese version) “使いかたガイド (Guide)” on-screen manual installed onto your FOMA terminal, and “Instruction Manual (Detailed Version)” as a PDF.
Contents FOMA Terminal ································2 What You can Do with P-04C···········3 Part Names and Functions ··············4 Styles ···············································6 Precautions······································7 Handling Precautions ···················· 16 Waterproof Performance ··············· 19 Introduction ▶ P.
Introduction FOMA Terminal 2 P-04C supports W-CDMA system. Because the FOMA terminal uses radio waves, you cannot use it in places where the radio waves do not reach, where they are weak even outdoors, such as inside tunnels, basements, or buildings, or out-of-service area. You might not be able to operate the FOMA terminal even when you are in a place with a fine view such as in a high-rise building or apartment.
What You can Do with P-04C 使いかたガイド (Guide) ▶P.38 ※ This function is available in Japanese mode only. AUTO-GPS ▶P.72 The AUTO-GPS function offers the useful services which provide you with information such as about weather forecast, tour spots, and shops around you. Start by Voice Waterproof Performance ▶P.
Introduction Part Names and Functions ❶ ❷ ❾ � ❸ � � ❹ ❺ ❻ ❼ � � � � � 4 ❽ �cCamera key/1Seg key ❶Air vent For adjusting the pressure inside the FOMA �ii-mode key/i-αppli key terminal. �hPower/End key ❷Light sensor For turning on/off the power or ending a For sensing brightness (Do not cover it call with your hands or do not put a sticker on �Numeric keys it. Doing so might disable detecting the For entering phone numbers and text brightness.
FOMA antenna※ Strap hole 1Seg antenna For receiving 1Seg broadcasting Engage your fingertip over the top of the 1Seg antenna, and pull it until it stops. Move it in the direction of the arrow without forcible pressure. To house the 1Seg antenna, do not do it forcibly. Damage to the antenna could result. Push the antenna until it stops, place it in correct direction, and then bring it down for housing.
Introduction Styles 6 The P-04C comes with two styles. ■Normal Style This style supports button operations. ■Viewer Style This style supports touch operations. To use the FOMA terminal in this style, rotate the display panel clockwise by 180 degrees and close it by pulling it toward you. To return to the Normal Style, open the display panel, and then rotate it counterclockwise by 180 degrees.
Precautions ALWAYS FOLLOW THESE DIRECTIONS Danger Warning Caution This symbol indicates that incorrect handling will almost certainly cause death or serious injury. This symbol indicates that incorrect handling poses a risk of causing death or serious injury. This symbol indicates that incorrect handling poses a risk of causing a slight injury or damage to the product or property. ■ The following symbols show specific directions: Denotes actions prohibited to do.
Introduction General precautions for FOMA terminal, batteries, adapters, desktop holder, touch pen, and UIM Do Danger Don’t Don’t Do not use, store or leave the FOMA terminal and its accessories in places with a high temperature such as near fire or places exposed to direct sunlight, or in cars under the blazing sun. Fire, burns, or injury may result. Do not place the FOMA terminal or its accessories inside cooking appliances such as microwave ovens or high-pressure containers.
Caution Don’t Do Do Do Do not store in humid or dusty places, or in high temperature environments. Fire, burns or electric shock may result. If the FOMA terminal and its accessories are used by a child, a guardian should explain how to operate them correctly. During use, a guardian should also check that they are being used as instructed. Otherwise, injury may result. Keep out of the reach of babies and infants. Accidental swallowing or injury may result.
Introduction Do Do 10 Turn off the FOMA terminal in places where use is prohibited such as in airplanes and hospitals. Otherwise, the electronic devices and electronic medical equipment in those places may be adversely affected. If the Auto power ON function is set, deactivate the setting, then turn off the power. For use inside medical facilities, make sure that you comply with their regulations. Engaging in any prohibited acts such as using the FOMA terminal in an airplane is punishable by law.
Don’t Do Do Do Precautions for batteries Before using the FOMA terminal inside a car, check with its ■ Check the description on the label of the manufacturer or dealer whether the battery pack for the type of battery. signals from the FOMA terminal Description Type will have any adverse effects. In some vehicle models, the signals Li-ion 00 Lithium-ion battery may adversely affect the electronic devices inside the vehicle. Such cases are rare.
Introduction Don’t Do Do not pierce it with nails, hit it with a hammer, or step on it. Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak. If the battery fluid or other material gets into your eyes, do not rub them. Flush your eyes with clean water and seek medical attention immediately. Otherwise, the loss of eyesight may result.
Don’t When plugging the AC adapter into the power outlet, or when unplugging it from the outlet, do not allow metal straps or other metal objects to come in contact with it. Fire, burns or electric shock may result. Do not touch the adapter cord, desktop holder, or power outlet with wet hands. Not wet Fire, burns or electric shock may hands result. Do Use the adapter at the specified V AC. When charging the FOMA terminal overseas, use the AC adapter available for use overseas to charge the FOMA terminal.
Precautions for UIM Introduction Caution Do Be careful not to touch the cut surface of the UIM when removing it. Otherwise, injury may result. Notes on using near electronic medical equipment ■ The description below meets “Guidelines on the Use of Radio-communication Equipment such as Cellular Telephones – Safeguards for Electronic Medical Equipment” by the Electromagnetic Compatibility Conference Japan.
■List of materials used Where it is used Display back surface※2 PC/tin vapor deposition + UV coating ABS/UV coating Battery surface (hinge side) PC + ABS/UV coating Back cover Connector terminal Stainless steel/ nickel plating + tin plating Connector Cover PC, elastomer/UV coating terminal Packing Silicon rubber Camera lens area Side key Around the side key Charging terminal PMMA/hard coating PC/aluminum vapor deposition + UV coating ABS/UV coating Brass/nickel plating + nickel palladium plating + gold
Introduction Where it is used Label (Battery compartment) Inner cover inside the back cover 1Seg Tip resin part antenna Metal part (Bottom of the tip resin part) Metal part (Wire area) Hinge area at bottom part Holder area Material/Finishing Polyester PC, Silicon rubber ABS/UV coating Stainless steel Nickel-titanium alloy Stainless steel Zinc alloy/nickel plating Different materials may be used in some areas depending on the body color.
Notes on handling the FOMA terminal ■Never forcibly press the surface of the touch panel, or operate it with something having a sharp point like a claw, ballpoint pen, or pin. Damage to the touch panel might result. ■Avoid using in extremely high or low temperatures. The FOMA terminal should be used within a temperature range of 5°C to 40°C (however, the use at 36°C or higher should be limited to temporal use in a bathroom etc.) and a humidity range of 45% to 85%.
Introduction ■Note the following points when you store a battery pack: Storage in a fully charged state (the state immediately after charging is completed) Storage with no battery power left (the state you cannot turn on the power of the handset due to battery drain) These may lower the battery pack’s performance and shorten its operating life.
Notes on handling the FeliCa reader/writer Caution Waterproof Performance Your P-04C comes with the waterproof performance equivalent to IPX5 (former JIS protection standard 5)※1 and IPX7 (former JIS protection standard 7)※2 with the connector terminal cover, inner cover and back cover firmly closed and no clearance gap and float found in them.
Introduction Do not use brushes, sponges, soaps, or detergents for washing. After rinsing off the FOMA terminal in water, wipe its surfaces thoroughly using a dry cloth, drain off the water (see page 17), and allow the FOMA terminal to dry out naturally. On Leisure Do not soak or drop your FOMA terminal into a pool or the sea nor operate it in water. If pool water or seawater splash the FOMA terminal, wash the terminal by following the prescribed method (see page 19).
Removing/Attaching the Back Cover ③ With the back cover stayed open about 2 mm, match it to the groove on the FOMA terminal. Then while pushing the back cover as a whole downward, slide it in the direction of Approx. 2 mm the arrow, and then install. ④ Confirm there is no gap between the back cover and the FOMA terminal. Caution ■About FOMA terminal Do not wash the FOMA terminal with a washing machine or ultrasonic cleaner. Never charge the battery when it gets wet.
Introduction 22 ■About the connector terminal cover, inner cover and back cover Do not open or close them with gloves put on hands. Fine dirt might adhere to the contact surface of the packing. Be careful that no fibers adhere to the packing when you try to wipe off moisture with a clean dry cloth. Do not peal the packing off. Also do not insert something pointed at the head into the clearance of the connector terminal cover or inner cover.
③ Lightly push the FOMA terminal against a clean dry cloth, and wipe moisture off the clearance gap of the microphone, earpiece, speaker, keys, or hinges. Do not directly wipe moisture out of joint gap using a cotton swab, etc. Introduction ④ Remove the back cover and wipe off any drops of water around the inner cover and the rear surface of the back cover, and then attach the back cover. Never open the inner cover. See page 19 for how to remove the back cover.
2 Before Using Attaching UIM/Battery Pack To insert the UIM/battery pack, remove the back cover, then open the inner cover, and insert. (See page 21) Basic Operation 1 Insert the UIM. 1. Pull the tab area, and slowly pull the tray straight out until it stops. Do not pull out the tray beyond the position where it stops. You may damage the tab if you do so. 2. Place the UIM on the tray with the golden IC surface upward. Align the cut of the UIM with the tray. 3. Push the tray until it stops.
About UIM The UIM is an IC card that holds your information such as phone numbers. You cannot use the FOMA terminal for communications such as voice/videophone calls, i-mode, or sending/receiving mail, unless the UIM is inserted.
Basic Operation 3 Put the bottom of the FOMA terminal into Charging Using AC Adapter Call/Charging indicator AC Adapter’s plug the stopper of the desktop holder (A) to Cover Power fit the head to the lock claw, and then socket Connector depress the FOMA terminal until it clicks AC Adapter Engraved (B). surface Connector terminal Be sure to charge the FOMA terminal with the FOMA terminal closed. Be careful that a commercial strap is not caught between the FOMA terminal and desktop holder.
Turning Power ON 1 Press and hold h for at least one second. After the Wake-up display and notes of waterproof are displayed, the Stand-by display appears. 1 Set the date and time. You can set the date and time. You can also correct the date and time automatically. 2 Set your Terminal Security Code. You can set your Terminal Security Code required for setting functions. “0000” is set at purchase. 3 Set the size of fonts. You can set the size of fonts on the display.
Basic Operation Notifying Your Caller ID on the Other Party’s Phone 1 m▶TEL function▶Dial/Receive setting ▶Caller ID notification 2 Select “Activate/Deactivate”. 3 Select “ON”. m▶本体設定 (Setting) ▶文字表示／入力 (Text display/input) ▶Select language Select “English”. The “バイリンガル (Select language)” setting is saved on the UIM. Checking Your Own Phone Number You can check your own phone number (Own number), the model name, etc.
Screen Explanation Viewing Display/Icon Status icon Battery level (estimate) ··········· A microSD card is inserted. ·········· Vibrator is set. Low When is shown, charge the battery. Depending on the usage state, the battery level indication might significantly vary. Radio waves reception level (estimate) Strong ·········· Ring Volume is set to “Silent”. ·········· In Manner Mode ···· An alarm is set.
Notification icon ······ New i-mode mail or SMS ······ Missed call ······ Record message Basic Operation ······ Videophone record message ······ The mode has automatically changed to eco Mode (ECO NAVI). ······ 1Seg has automatically terminated (ECO NAVI). Desktop icon ····· i-concier ····· 使いかたガイド (Guide) ···· Sends a mail message to “スグデコ！ (Sugu-deco)” ··· Shows the site of the URL ······ Pedometer ····· Start by voice ····· Quick search Proceed to respective functions from icons, etc.
Navigation Displays and Key Operations Operating Command Navigation Key Key operations you can perform while you are operating a function are shown at the bottom of the display. (Navigation displays) ■Key assignments and basic navigation displays Zo Moves the cursor or highlighted display up. (Hold down to scroll continuously.) Scrolls the page up. Vo Moves the cursor to the right. Scrolls forward page by page. (Hold down to scroll continuously.) Fixes the operation.
Simple Menu Menu Operation Main Menu Press m from the Stand-by display to show Main Menu. Basic Operation Menu icons Simple Menu is a menu focusing on only basic functions for easy operation. By setting “Simple menu” using the Kisekae tool, you can show the Simple Menu by pressing m from the Stand-by display. Some operating procedures or items which appear on the display in Simple Menu differ from the ones described in this manual.
Functions Starting with Simple Operation Depending on the function, you can start it either by selecting a menu item or by key operation from the Stand-by display. The following are the functions you can start by pressing keys for at least one second. Key Performance Sets/Releases Keypad Lock. Xo Shows the Registration display for Phonebook entries. c Starts 1Seg. l Executes Check mail/message. i Shows the Software list. d Executes Start by voice. 3 Sets/Releases IC Card Lock.
Basic Operation Using Touch Panel In place of operating the keys in Normal Style, in Viewer Style you can use the touch pen on the touch panel (display) to select items, scroll the display and perform other operations. In Normal Style, you cannot perform any operations by touching the touch panel. Before use, peel off the stickers which is stuck on the touch panel at the time of purchase. ■Notes on using Touch Panel In the following cases, the touch panel may not work even if you touch it.
Basic Touch Panel Operations Use the touch pen to perform the touch panel operations. Operation Main Operation Select/OK Touch Simply tap the touch panel. Touch an item or control key on the touch panel. Slide Touch and keep your finger on the touch panel and move it up, down, right or left. Scroll Slide an item on the list, etc. Display the previous or next data You can use the “Slide” operation to display the previous or next data/page, etc.
Setting Display Lock Adjusting the Touch Panel You can set Display Lock to ensure that no further operations using the touch panel will be performed. In this way, you can prevent operations from being carried out in error while you are carrying the FOMA terminal around in a bag. Take the steps below to adjust the Touch Panel operations (where the touched positions are detected). Basic Operation 1 Press v in Viewer Style. What is shown on the display is cleared, and Display Lock is set.
Displaying Touch Menu In Viewer Style, the Touch Menu is displayed. Home Menu Customize Menu When “ ” is touched with Viewer Style selected, the Customize Menu is displayed. On the Customize Menu, you can register short-cut icons up to 27 and activate any of the functions by touching the corresponding short-cut icon. When “ ” is touched with Viewer Style selected, the Normal Menu is displayed. You can operate any of the functions by touching the corresponding icon on this menu.
Basic Operation Using Start by Voice Using Guide You can call up the function by voice. The first time you use this function, select “利用する (Use)” ). on the usage information display, or press c( This function is available in Japanese mode only. You can search and check the operating methods of the functions you want to know and use. You can execute some functions from “使いかたガイド (Guide)”. This function is available in Japanese mode only. 1 Press and hold d for at least one second.
Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. 1 Select a input mode. Press l( input modes. 1. Press No to specify the area to be converted. 2. Press Bo to move the cursor onto the candidate list. 3. Press Mo to select a conversion candidate. 4. Press Oo to fix the character. Enter characters. By repeatedly pressing a numeric key, you can enter other characters assigned to the key.
Entering “タダの菓子” in the text of an i-mode mail message. Basic Operation 1 2 l▶l( ) ▶Select the text field. Enter hiragana characters in Kanji/Hiragana input mode. 3 Use Co to move the cursor to the right of “の”. 4 Use Bo to move the cursor onto the candidate list ▶Use Mo to highlight “タダ の” and press Oo( ). 5 Use Bo to move the cursor onto the candidate list▶Use o M to highlight “菓子” and press Oo( ). た → Press 4 once and Vo once. だ → Press 4 once and a once. の → Press 5 five times.
Sound/Screen Setting Changing Ring Tone Changing the ring tone for incoming voice calls 1 1 2 Select “Phone”. 3 Use Bo to adjust the volume. Select “Phone”. Press c( ) to check the content actually played back or displayed. To set a ring tone for mail messages, videophone calls, and so on, select the corresponding item. 3 Select “Select ring tone”. 4 Select a type of ring tone. 5 Select a folder▶Select a ring tone. m▶Setting▶Sound/Vib.
Basic Operation Using Manner Mode Setting Keypad Sound OFF With a single key press, you can set a tone from the FOMA terminal such as a ring tone, keypad sound, and alarm sound silent. When you start Manner Mode, not a sound but the vibration notifies you of incoming calls or messages. You can silence a Keypad sound for when you press a key. 1 2 Press and hold s for at least one second. “ ” appears on the Stand-by display. To release Perform the same operation.
Changing Display Brightness You can adjust the brightness of the display. You can also set to automatically adjust the display brightness according to the ambient light. 1 m▶Setting▶Backlight/Illum. ▶Backlight Select “Brightness”▶Select “ON”. 3 Press Bo to adjust the brightness. Lighting off/Power Saver Mode You can set the display brightness to OFF. You can also set the time that elapses before Power Saver Mode activates.
Changing Font Size Using Kisekae Tool Changing the size of all the characters to “X-large”. You can set the ring tone, Stand-by display, menu icons and others at a time. Basic Operation 1 2 Select “Character size”. 3 Select “X-large”. Select “Separate setting” when you want to set the character size of each function separately.
Changing Illumination When Receiving Changing call Illumination for voice calls. 1 m▶Setting▶Backlight/Illum. ▶Illumination setting Select “Illumination in call” ▶Select “Illumination”. 3 Select “Phone”. 4 1 Press and hold 5 for at least one second. “ To set illumination such as for mail messages and videophone calls, select the corresponding menu. ” appears. To release Perform the same operation. Select a color. If you select “Gradation”, color 1 to 12 light up in sequence.
eco Mode Autostart This setting ensures that the mode will be automatically set to the eco Mode when the remaining battery level has dropped below the set level. “Battery level” of “eco mode autostart” is set to “40%” in default. Basic Operation 1 m▶Setting▶Battery ▶eco mode autostart 2 Select “ON”. 3 Set each item▶c( When the “eco mode autostart” is set to “ON”, “ (gray)” will be displayed.
Terminal Security Code “0000” at purchase This is a four-to-eight digit number for deleting all files or changing settings. When the display for entering the Terminal Security Code appears, enter your four-to-eight digit code ). and press Oo( To change 1. m▶Setting▶Lock/Security▶Change security code Determining at the time of contract “お客様サポート (User support)” is available in Japanese only.
PIN Unblocking Key (PUK) Basic Operation The PIN unblocking key (PUK) is the eight-digit number for releasing the blocked PIN1 code and PIN2 code. You cannot change this code by yourself. If you enter a wrong PIN unblocking key (PUK) 10 times in succession, the UIM is locked. In that case contact one of docomo Shops. Dial Lock You can set your FOMA terminal not to be used by a third party. You can do no operations other than answering calls and turning on/off the power. 1.
Omakase Lock When you have lost your FOMA terminal or in other cases, you can lock your personal data (such as Phonebook entries) and the IC card function of Osaifu-Keitai by contacting DOCOMO. For details on Omakase Lock, refer to “User’s Guide [Basic Usage]”. Original Lock Keypad Lock You can lock functions which utilize personal information such as Phonebook entries or schedule events. 1. m▶Setting▶Lock/Security▶Lock ▶Enter your Terminal Security Code ▶Select a level for Original Lock.
Setting Incoming Call Restriction Resetting to Default Basic Operation You can set whether to receive (accept) or not to receive Resetting the Function Settings to Default (reject) incoming calls depending on the reason, such as from You can reset the items on “Function List”, which are the parties which has not been registered in Phonebook or indicated by . (See page 103) incoming calls from any parties who do not notify you of their might include the functions The items indicated by phone numbers.
Call Telephone Making a Call/Videophone Call Making a Call by Entering the Phone Number 1 Enter a phone number starting with a city code. 2 Press d to make a call. 3 ) to make a videophone call. Search a Phonebook entry by the name stored in Phonebook 1 Press Xo. 2 Select “Search name”. Enter the reading of the name from the first character. You can use another search method such as “Search phone No.”, and “Search e-mail”.
Making a Call with Redial/Received Calls Making an International Call 1 Press Vo(Redial) or Co(Received calls). 2 Select a call record▶d You can use WORLD CALL to make an international call from Japan. Contact “docomo Information Center” on the back page of this manual for inquiries about details on WORLD CALL. When using international carriers other than DOCOMO, contact them. Press c( ) to make a videophone call.
Receiving a Call/Videophone Call 1 A call comes in. The ring tone sounds and the Call/Charging indicator lights. 2 Press d to answer the call. When a videophone call comes in You can receive the videophone call the same way as with a voice call. The substitute image is sent to the other party. Press h to end the call. By activating Record Message, you can record a caller’s voice/video message when you cannot answer the call.
Using Public Mode (Drive Mode) Using Public Mode (Power Off) When Public Mode (Drive Mode) is set, callers who place calls to you will hear voice guidance telling them that you cannot respond to their calls because you are now driving or in a public place (such a train, bus or movie theater) where you cannot talk freely, and their calls are automatically ended.
Using Various Network Services ■Network services available The following are the DOCOMO network services available for the FOMA terminal.
Using Voice Mail Service Using Call Waiting Service 1 1 m▶TEL function▶Voice mail service To activate the service 1. Select “Activate”▶Select “YES”. You can also specify a ring time. Connect To play back the message 1. Select “Play messages”▶Select “Play (voice call)” or “Play (videophone)”▶Select “YES”. 2. Operate following the voice guidance. m▶TEL function▶Other network serv. ▶Call waiting To activate the service 1. Select “Activate”▶Select “YES”. Answer an Incoming Call during a Call Press d.
Emergency Call Emergency Calls Calls to police Calls to fire station and ambulance Calls for accidents at sea Phone number 110 119 118 Connect This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/119/118, information about the place where you are dialing from (location information) is automatically notified to emergency-response agencies such as police stations.
Connect Using Overseas 58 International Roaming (WORLD WING) is a service that allows you to use the FOMA terminal with the phone number and mail address you use in Japan, in a service area of the overseas carrier partnered with DOCOMO. It enables you to continue using the voice call, SMS and i-mode mail settings without having to make any changes.
Making a Call to Outside the Country You Stay in 1 Sending i-mode Mail 0(for at least one second) ▶Enter numbers in order of country code →area code (city code) →destination phone number. Once you subscribe to i-mode, you can exchange e-mail messages over the Internet. You can attach within 2 Mbytes of up to 10 files (photos, moving pictures, etc.) with body text added. For details on i-mode mail, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
Sending Deco-mail Sending Decome-Anime You can change the color or size of characters or background You can create impressive messages by inserting text or color, or insert images or Deco-mail pictograms. images into a Flash file. 1 2 Connect 3 ) You can also select “Decome-Template” to create Deco-mail. Enter an address and subject. 1 l▶Create new Deco-Anime 2 Enter an address and subject. 3 Select the text field▶d When the text field is selected, the prediction conversion candidates appear.
Displaying Received i-mode Mail Replying to i-mode Mail 1 Select a folder. Press c( displayed. 2 Enter each item. Select an i-mode mail message. 3 Press c( 1 l▶Inbox 2 3 ) while an i-mode mail is ). Forwarding i-mode Mail Connect 1. m( ) while an i-mode mail is displayed ▶Reply/Forward▶Forward 2. Enter each item. 3. Press c( ). When you receive an i-mode mail ” appears on the message, “ upper area of the display.
Checking New i-mode Mail Sorting i-mode Mail You can check the i-mode Center for a new mail message or Message R/F. You can use “Auto-sort” to sort received/sent i-mode mail messages into a folder such as “Business” or “Friend” which has been created in advance. Sorting mail messages, which come from the address stored in the Phonebook, into a folder 1 Press and hold l for at least one second. Connect When checking is completed, the following display appears.
Early Warning “Area Mail” Receiving Area Mail You can receive information such as about earthquake alerts that are issued from the Japan Meteorological Agency as an Area Mail message. ” lights and the When an Area Mail message arrives, “ buzzer for Area Mail sounds. The received content of some messages is automatically displayed. To erase the displayed content, select “OK”. You can receive Area Mail messages even when you are not contracted to use i-mode.
Displaying Received SMS Message 1 l▶Inbox Phonebook Storing Phonebook Entries 2 Select a folder. Storing New Phone Numbers/Mail Addresses, etc. 3 Select an SMS message. You can store Phonebook entries in the FOMA terminal (Phone) or on the UIM. 1 Connect 2 Press and hold Xo for at least one second. Select “Phone”. The display for entering a name appears. Enter a name and proceed. When storing entries onto the UIM Phonebook Select “UIM”.
Storing Phonebook Entries from Redial/ Received Call 1 Press Vo(Redial) or Co(Received calls). 2 Highlight a call record and press m( )▶Select “Add to phonebook”. 3 Select “Phone”▶Select “New”. Enter each item. 5 Press c( ). 1 2 Xo▶Search and select a Phonebook entry. m( )▶Edit phonebook ▶Select an item to be edited ▶Edit the contents. 3 Press c( 4 Select “YES”. ).
i-mode/Full Browser Search Displaying i-mode Sites i-mode is a service that enables you, by using the display of the terminal supporting i-mode, to use online services such as site access, Internet access, and i-mode mail. i-mode is a pay service that is available on a subscription basis. For details on i-mode, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. You can display SSL/TLS※-compatible pages via FOMA terminal.
Displaying Websites Designed for PC Switching Browsers 1 1 m▶imode/web▶Full Browser Home By default, a confirmation display appears asking whether you want to use Full Browser. 2 Select “YES”. Search You can browse Internet websites designed for PCs using the You can switch to Full Browser to show the Internet websites Full Browser function. incorrectly displayed by i-mode. Note that you are charged a high communication fee for The billing system differs between i-mode and Full Browser.
Viewing and Operating Sites Saving Site Contents Operations on site viewing display Scroll display/Move highlighted/ Move the pointer: Mo Select an item (link): Oo( Search 1 ) Return to previous page: l( Forward to next page: i( If you save the page once you visited as a screen memo, you can easily refer to it without connecting to i-mode. ) 2 ) “ ” or “ ” appears while accessing by Full Browser.
i-Channel 1 Press r. Search This service distributes information such as news and weather forecast to i-Channel mobile phones. The automatically received latest information flows on the Stand-by display by tickers. You can read it on the i-Channel list by pressing -r. Further, two types of channels, “Basic channel” provided by DOCOMO and “Okonomi (Optional) channel” provided by IPs (Information Providers) are available.
Search Map/GPS 70 GPS is a function that receives signals from the GPS satellites and acquires information on the FOMA terminal’s position. This GPS function cannot be used as a navigation device for airplanes, vehicles or people or as a device for conducting high-accuracy surveying. If it is used for these purposes or even if it is used for other purposes, bear in mind that NTT DOCOMO INC.
Checking Current Location You can start GPS compatible i-αppli, and you can read a map of current or specified location. At purchase, “地図アプリ (Map Application)” is set. You can locate your current location by GPS. You can also display a map using this location information and send this information as an i-mode mail. You are not charged a packet communication fee for checking your current location.
Search Using AUTO-GPS Your current location is automatically positioned, and by sending your location information periodically to your GPS service provider, you are enabled to receive a variety of services according to your location, such as weather forecast, shopping guide, or sightseeing information around. To use a service that supports the AUTO-GPS function, use the AUTO-GPS function compatible i-αppli to establish the AUTO-GPS service information for respective services.
Camera Viewing and Operation of Finder Display MENU You can check the settings. Key guidance The key operation guide is displayed. Focus frame When a subject is focused on, the frame becomes green. Zoom bar The zooming status is displayed. Number of recordable image Shows the remaining time of recordable moving pictures. Shows the number of remaining recordable still images. You can check the setting of Image stabilizer.
Shooting Still Images/Moving Pictures Shooting Still Images 1 m▶CAMERA/TV/MUSIC▶CAMERA ▶Digicam mode 2 Press Oo( ). 3 Press Oo( ). When shooting images by touch operations When shooting images in Viewer Style, you can touch the touch panel to shoot the images instead of pressing v. (Touch Shutter） ] on the shooting screen to set it to . Then Touch [ touch the subject, and shoot. Enjoy Shooting Moving Pictures 1 Start recording by pressing i from the Finder display for Digicam Mode.
Shooting in Various Ways Continuous Shooting Still Images You can continuously shoot still images within the sizes from 3M (1536 x 2048) to Stand-by (480 x 854). Shooting Still Images Using Auto Shutter The camera automatically shoots identifying the number of faces and the distance between faces by face detection. Using “Group shutter” to shoot a group of three persons 1 m( ) from the Finder display for Digicam Mode▶Cont. set.
1Seg Enjoy Using 1Seg 76 ■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving video and audio. For about fee charged by NHK, contact NHK. ※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).
Setting Channels When you activate 1Seg for the first time or change the area you are in, you need to operate “Channel setting”. Select “Auto channel setting” to enable you to search automatically for broadcast stations you can watch. You need to set this function with the 1Seg antenna extended when you are in a terrestrial digital TV broadcasting service area. 1 Watching 1Seg 1 Press and hold c for at least one second. 1Seg starts and the viewer display appears.
Viewing and Operating Viewer Display Displayed while you are watching a 1Seg program Video being recorded Program Information (outline) Video Switch Visual Image/Caption Caption Airwave Reception Level (estimate) Data Broadcasting Strong Weak “ ” appears out of the broadcasting area.
Setting Timer Watching or Recording 1Seg Set the date and time, a channel, and program name, and enter them to the TV Timer List or Timer Recording List. When the set time arrives, watching or recording starts. 1 m▶CAMERA/TV/MUSIC▶1Seg 2 Select “TV timer list” or “Timer recording list”. 3 Press c( 4 Enter each item. 5 Press c( Playing Recorded Video 1 m▶Data box▶1Seg 2 Select “Video”▶Select a file. ). ).
Music Enjoy Music&Video Channel 80 Music&Video Channel is a service which automatically delivers up to about two-hours sound programs at night just by selecting your favorite music programs etc. in advance. Further, you can enjoy high-quality video program of up to about one-hour. Programs are updated periodically and you can enjoy the delivered programs at any time such as on commuting. ■Before using Music&Video Channel Music&Video Channel is a pay service that is available on a subscription basis.
Downloading Chaku-uta Full® Music Files You can download Chaku-uta Full® music files from sites. 1 Select a Chaku-uta Full® music file from a downloadable site. 2 Select “Save”▶Select “YES”. 3 Select a destination folder. “Chaku-uta Full” is a registered trademark of Sony Music Entertainment Inc. ■Handling music files You can use music files saved on the microSD card for personal use only.
i-αppli/i-Widget Enjoy i-αppli is a software program for terminal supporting i-mode. By downloading various software programs from the i-mode site, you can use your FOMA terminal more conveniently. You can automatically update the stock price information or weather information, and enjoy games without accessing network. i-Widget is a useful function for gaining easy access to frequently used contents and tools (Widget Appli programs) such as the calculator, clock, memo pad and stock market information.
Downloading i-αppli from Sites 1 Select a software program from a downloadable site. 2 Select “OK” when downloading ends. 3 Select “YES”. When the software program is storable in “Customize Menu”, the confirmation display appears asking whether to store it. You can delete the pre-installed i-αppli programs. You can re-download deleted programs from the “P-SQUARE” site.
i-motion/Movie Enjoy i-motion is a file consisting from video, audio, and music which you can download to your FOMA terminal from i-motion sites that support i-motion. You can also set it for a ring tone. Also, by using high speed communication, you can play back smooth and high-quality movie files provided by portal sites, movie specialty sites and other sites on the Internet. When downloading or streaming an i-motion/movie file, you might receive a bulky file.
Osaifu-Keitai Osaifu-Keitai/ToruCa 1 More Convenient Osaifu-Keitai is equipped with the IC card which enables you to make payments, use coupons, enjoy stamp rallies and so on by placing the FOMA terminal over the scanning device in the stores or other locations. Furthermore, by placing the FOMA terminal over a scanning device, you can access sites and web pages, obtain the latest coupons by communication, and check the deposits of electronic money and the status of its use.
More Convenient i-concier 86 i-concier works to serve you with a pleasant life just like a clerk or concierge does. The service holds your data (area information about your neighborhood, Memo, Schedule, ToruCa, Phonebook, etc.) and sends you information, with good timing, about a variety of things according to the contents of your memo and your schedule event, your living area, your current location, or your preference or taste.
Convenient Tools Using Alarm 1 1 m▶Tool▶Alarm 2 Highlight an alarm and press c( 3 Enter each item. 4 Press c( m▶Tool▶Schedule Select a date to show a schedule event of the selected date. Select the schedule event to confirm its details. 2 m( 3 Enter each item. 4 Press c( )▶Select “New”. ). The alarm does not sound in Public mode (Drive mode), Dial Lock, “Alarm” locked in Original Lock or Omakase Lock. ). More Convenient Using Schedule ).
Using Bar Code Reader Scan a Code Access P-SQUARE by using You can use the camera to scan QR codes and others, and QR code on the right store them as files. From the scanned data, you can make calls, compose i-mode mail messages, access Internet websites, and so on. QR code for ■When scanning with Bar Code Reader accessing the site Guide frame Scan the code as large as possible within the guide frame.
Using Pedometer 1 Creating Handwriting Photo/Memo On the touch panel, you can draw pictures or write characters by hand onto the images or you can add decoration. The Handwriting photos/memos you have created are saved as JPEG images. 1 2 m▶Tool▶Pedometer The measurement records of your pace are displayed. From the Submenu, you can switch between ON/OFF of Pedometer, or set user information. Normal Menu▶Tool ▶Handwriting photo/memo Set background ▶Edit Handwriting photo/memo ▶Touch “Finish”.
Data Management More Convenient Using microSD Card 90 If you do not have a microSD card, you need to purchase it. P-04C supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 32 Gbytes (As of April 2011). For the latest operation check information such as the memory capacity and manufacturers of microSD cards, access the following sites (in Japanese only). Note that the microSD cards other than published in the sites might not correctly work.
Icons on the Display : A microSD card is inserted. : Data is being read/written. (Do not remove the microSD card nor turn off the FOMA terminal.) : The microSD card is write-protected. : The microSD card cannot be used. (Insert the microSD card again. If “ ” is still displayed, execute “Check microSD” or “microSD format”.) Formatting microSD Card When you use the microSD card for the first time, you need to format (initialize) it. Be sure to use P-04C for formatting.
Copying Data to microSD Card Displaying Data Stored on microSD Card Copying a still image Displaying a still image 1 1 m▶Data box▶My picture▶l( 2 Select a folder▶Select an image. More Convenient 2 92 m▶Data box▶My picture ▶Select a folder. Highlight a still image to be copied and press m( ) ▶Select “Copy to microSD” ▶Select “Copy this”. Check Capacity of microSD Card You can display the total memory and used memory (estimated) on the microSD card. 1.
Backing up Data to microSD Card You can back up Phonebook entries, schedule events, messages, memos, bookmarks, and the settings on and information about your FOMA terminal collectively onto the microSD card. When restoring the backup data onto your FOMA terminal, they are collectively restored. Backing up data from the FOMA terminal onto the microSD card is collectively applied to all data, so emptied files in the FOMA terminal are also backed up on the microSD card.
Sending Data For infrared communications, set the receiving end terminal first, and then start sending data within 30 seconds. Connecting to a PC You can connect the FOMA terminal to a personal computer to exchange WMA files, images or other files stored on microSD card. Submenu of the data to be sent You can also access the Internet to perform data ▶Select “Send Ir data” or “iC communication. ※You need the FOMA USB Cable with Charge Function 02 transmission”. (option) or FOMA USB Cable (option).
Support Troubleshooting First of all, check to see if you need to update the software program and then update it if necessary. See page 99 for how to update software programs. When symptom persists even after you check the countermeasures for the problem you suffer, contact the “Repairs” counter listed on the back page of this manual or a repair counter specified by DOCOMO. The “Repairs” counter is available in Japanese only. Power source The FOMA terminal does not turn on.
The usable time of the battery is short. …Make sure not to leave the FOMA terminal out-of-service-area for a long time. If your FOMA terminal is left out-of-service area, it searches for radio waves to establish communications, consuming more power. …The usable time of the battery pack varies depending on the usage environment or its remaining life. …Battery packs are consumables. The usable time slightly shortens each time you charge the battery.
Warranty and After-sales Service Warranty Make sure that you have received a warranty card provided at purchase. After checking the contents of the warranty card as well as “Shop name and date of purchase”, keep the warranty card in a safe place. If you notice that necessary items of the warranty card are not filled in, immediately contact the shop where you purchased the FOMA terminal from. The term of the warranty is one year from the date of purchase.
Others 98 ◎Other points to note Make sure not to modify the FOMA terminal or its accessories. ・We might reject to repair depending on the degrees of your modification. The following might be regarded as modifications: ・To put stickers, etc. onto the liquid crystal or keys ・To decorate the FOMA terminal using adhesives ・To replace the coverings etc.
Updating Software Others This function is to check whether you need to update software programs in the FOMA terminal by connecting to the network, and if necessary, you can download some parts of software programs using packet communication, and can update the software programs. If you need to update the software programs, the DOCOMO website and “お客様サポート (User support)” in Japanese iMenu lets you know information about updating software programs.
Start Software Update from Icon Start Software Update from Menu 1 1 Select “Update notification icon” on the Stand-by display. Update notification icon Check whether you need to update software programs. Others 2 100 When update is necessary, “Update is needed” is displayed. And you can select either “Now update” or “Reserve”. When you select “Now update”, update immediately starts.
Check Harmful Data You can detect data or application programs, which might cause troubles, from among those downloaded to your FOMA terminal, and then can delete the data or stop starting the application programs. This scan function provides a certain protective measure to filter out data that might cause troubles with your FOMA terminal at the time when you browse websites or receive messages.
Options and Related Devices Combining various options with the FOMA terminal, you can realize more versatile use from personal purpose to business purposes. Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.
Function List Mail Execute “Resetting the Function Settings to Default” on page 50 for the items indicated by to return to the respective defaults.
Software list iαppli data iαppli call logs End stand-by info End Widget appli info iαppli run info iαppli setting Security error history Auto start info Trace info Auto-start setting Disp.
Tool Image Video Position memory Document viewer Font SD other files Search all history Bar code reader Phrases/Store word Scan code Saved data Receive Receive all Schedule Memo Pedometer Phonebook Rec. msg./Voice memo Play/Delete msg. Play/Delete VP msg. Record voice memo Record message setting Dialed/Received call Dialed calls Received calls Redial mixi setting PicMate setting GREE setting Backup/Restore Dial/Receive setting Nuis.
Videophone setting Call duration/charge Koe-no-Takuhaibin Missed call notice Visual preference Select image Auto redial as voice Others 106 Other network serv. Ntfy switch-mode Reject videophone Hands-free switch V.phone while packet Call duration/charge Notify cost limit Reset total Auto reset Play message Settings 2in1 Melody call Voice mail service TEL function Call rejection set.
Backlight/Illum.
Overseas NW search Others Overseas setting 108 Overseas use guide i-concier Roaming guidance Int’l dial assistance imode service set. Mail/Message usage set Network service Profile Osaifu-Keitai Map&GPS set./history Map setting GPS button setting Location request set. AUTO-GPS Positioning mode set. Register LCS client Service setting Serv. host URL set. Illum./Tone settings Network search setting PLMN setting Display operator name Display area status Re-search icon set.
Specific Absorption Rate (SAR) of Mobile Phone SAR Certification Information Ministry of Internal Affairs and Communications Website: http://www.tele.soumu.go.jp/e/sys/ele/index.htm Association of Radio Industries and Businesses Website: http://www.arib-emf.org/index02.html (In Japanese only) NTT DOCOMO, INC. Website: http://www.nttdocomo.co.jp/english/product/sar/ Panasonic Mobile Communications Co., Ltd. Website: http://panasonic.
European RF Exposure Information This mobile phone complies with the EU requirements for exposure to radio waves. Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR* limits** for exposure to radio-frequency (RF) energy, which SAR* value, when tested for compliance against the standard was 0.883 W/kg. While there may be differences between the SAR* levels of various phones and at various positions, they all meet*** the EU requirements for RF exposure.
station antenna, the lower the output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the U.S. government-adopted requirement for safe exposure. The tests are performed in various positions and locations (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.
Intellectual Property Right Copyrights and Portrait Rights Powered by JBlend™ Copyright 2002-2011 Aplix Corporation. All rights reserved. JBlend and JBlend-related trademarks are trademarks or registered trademarks of Aplix Corporation in Japan and other countries. f is a registered trademark of FeliCa Networks, Inc. microSDHC Logo is a trademark of SD-3C, LLC.
Others iWnn of OMRON SOFTWARE Co., Ltd. is used for conversion methods for Japanese language. iWnn © OMRON SOFTWARE Co., Ltd. 2008-2011 All Rights Reserved. “Text Profiler” is trademark of OMRON Corporation. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Others 114 Content providers are using the digital rights management technology for Windows Media contained in this device (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is not misappropriated. This device uses WM-DRM Software to play Secure Content (“WM-DRM Software”).
Access the following for checking or changing the contents of your contract, or for applying to respective services, and asking for related documents: From i-mode ｉMenu ▶ お客様サポート (User support) ▶ お申込・お手続き (Applications/Procedures) ▶ 各種お申込・お手続き (Respective applications/procedures) Packet communication charges free From PC My docomo (http://www.mydocomo.com/) ▶ 各種お申込・お手続き “お客様サポート (User support)” and My docomo are available in Japanese only. You will need your “network ID” for the access from i-mode.
Loss or theft of FOMA terminal or payment of cumulative cost overseas (available 24 hours a day) ■ From DOCOMO mobile phones International call access code for the country you stay at -81-3-6832-6600* (toll free) Failures encountered overseas (available 24 hours a day) ■ From DOCOMO mobile phones International call access code for the country you stay at -81-3-6718-1414* (toll free) * You are charged a call fee to Japan when calling
General Inquiries Repairs 0120-005-250 ■ From DOCOMO mobile phones ■ From land-line phones (toll free) * Service available in English, Portuguese, Chinese, Spanish, and Korean. * Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) ■ From DOCOMO mobile phones ■ From land-line phones (In Japanese only) (No prefix) 151 (toll free) * Unavailable from land-line phones, etc.
