User's Manual

42
Basic Operation
Changing Display Brightness
You can adjust the brightness of the display. You can also set
to automatically adjust the display brightness according to
the ambient light.
1
m
󱽄
Setting
󱽄
Backlight/Illum.
󱽄
Backlight
2
Select “Brightness”
󱽄
Select “ON”.
3
Press Bo to adjust the brightness.
You can set the display brightness to OFF. You can also set
the time that elapses before Power Saver Mode activates.
Power Saver Mode activates when the time set for “Time
to saver” has elapsed without any operations on the
FOMA terminal. The display turns off to reduce battery
consumption.
1.
m
▶
Setting
▶
Backlight/Illum.
▶
Backlight
2.
Select “Lighting”
▶
Select “OFF”.
3.
Enter the time (seconds) for “Time to saver”.
Lighting off/Power Saver Mode
Making Display Hard to See from People
Around
You can set “View blind” to make it harder for the people
around you to see the display from oblique angles.
1
Press and hold 8 for at
least one second.
“ ” appears on the
Stand
-
by display.
To release
Perform the same operation.