P-01G INSTRUCTION MANUAL ’14.
Thank you for selecting the “P-01G”. Read this manual before use to correctly operate your P-01G. About manual of P-01G Basic Package The operating procedures for the P-01G are also published as in P-01G Handset (With Warranty) Desktop Holder P55 “使いかたガイド (Guide)” on-screen manual installed onto your FOMA terminal, and “Instruction Manual (Detailed Version)” as a PDF.
For Loss, Theft, Malfunction, and Inquiries while Overseas (24-hour Reception) ■ From DOCOMO mobile phones International call access code for the country you stay -81-3-6832-6600* (toll free) * You are charged a call fee to Japan when calling from a land-line phone, etc. ※ If you use P-01G, you should dial the number +81-3-6832-6600 (to enter ‘+’, press and hold the ‘0’ key for at least one second).
General Inquiries Repairs 0120-005-250 ■ From DOCOMO mobile phones ■ From land-line phones (toll free) (In Japanese only) * Service available in English, Portuguese, Chinese, Spanish. * Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) (No prefix) ■ From DOCOMO mobile phones ■ From land-line phones (In Japanese only) (No prefix) 151 (toll free) * Unavailable from land-line phones, etc.
Contents FOMA Terminal ······························ 2 Part Names and Functions ············ 3 Precautions···································· 5 Handling Precautions ·················· 13 Waterproof/Dust-proof Performance ··· 17 Before Using ················································· 21 Screen Explanation ······································ 24 Character Entry ············································ 31 Sound/Screen Setting ·································· 32 Lock/Security···············
Introduction FOMA Terminal 2 This FOMA terminal supports W-CDMA system. Because the FOMA terminal uses radio waves, you cannot use it in places where the radio waves do not reach, where they are weak even outdoors, such as inside tunnels, basements, or buildings, or out-of-service area. You might not be able to operate the FOMA terminal even when you are in a place with a fine view such as in a high-rise building or apartment.
Part Names and Functions ❶Air vent For adjusting the pressure inside the FOMA terminal ❷Earpiece For listening to the other party’s voice ❸ ❸Display Microphone For speaking to the other party ❹oCommand navigation key For operating functions and menus cCamera key/1Seg key ❺mMenu key For showing the Main Menu ❹ ❺ ❻ ❼ ❽ Light sensor For sensing brightness (Do not cover it with your hands or do not put a sticker on it. Doing so might disable detecting the brightness.
Introduction Call/Charging indicator Lights while you are receiving a call or message, or charging. Sub-display FOMA antenna※ Infrared data port For using infrared communication and the infrared remote control fmark An IC card is installed. Use it for Osaifu-Keitai or iC communications. Speaker Back cover Remove this when attaching/removing the battery pack, docomo mini UIM card, and microSD card.
Precautions ALWAYS FOLLOW THESE DIRECTIONS Danger This symbol indicates that incorrect handling will almost certainly cause death or serious injury. Warning This symbol indicates that incorrect handling poses a risk of causing death or serious injury. Caution This symbol indicates that incorrect handling poses a risk of causing a slight injury or damage to the product or property. ■ The following symbols show specific directions: Denotes actions prohibited to do.
Introduction General precautions for FOMA terminal, batteries, adapters, desktop holder, and docomo mini UIM card Danger Don’t Don’t Do not use, store, or leave the FOMA terminal or its accessories in places with a high temperature (such as near fire, near heating appliances, inside a kotatsu or near other furniture with heating elements, in places exposed to direct sunlight, or in cars heated by the sun). Fire, burns, or injury may result.
Caution Don’t Do Do Do not store in humid or dusty places, or in high temperature environments. Fire, burns or electric shock may result. If the FOMA terminal and its accessories are used by a child, a guardian should explain how to operate them correctly. During use, a guardian should also check that they are being used as instructed. Otherwise, injury may result. Keep out of the reach of babies and infants. Accidental swallowing, injury or electric shock may result.
Introduction Do Do 8 Turn off the FOMA terminal in places where use is prohibited such as in airplanes and hospitals. Otherwise, the electronic devices and electronic medical equipment in those places may be adversely affected. If the Auto power ON function is set, deactivate the setting, then turn off the power. For use inside medical facilities, make sure that you comply with their regulations. Engaging in any prohibited acts such as using the FOMA terminal in an airplane is punishable by law.
Caution Don’t Don’t Don’t Do not use the FOMA terminal if it has been damaged. Fire, burns, injury or electric shock may result. If you accidentally damage the display part and the substance inside leaks out, keep your face, hands and skin away from it. Otherwise, you may impair your eyesight or damage your skin. If this substance should get into your eyes or mouth, immediately rinse them with clean water, and then seek medical attention.
Introduction Don’t Do Do not use excessive force such as pierce it with nails, hit it with a hammer, or step on it. Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak. If the battery fluid or other material gets into your eyes, do not rub them. Flush your eyes with clean water and seek medical attention immediately. Otherwise, the loss of eyesight may result.
Precautions for adapters and desktop holder Warning Don’t Don’t Don’t Don’t Don’t Do not use the AC adapter and desktop holder in humid places such as a bathroom. Fire, burns or electric shock may result. The DC adapter is for use only in a negative (-) grounded vehicle. Do not use it in a positive (+) grounded vehicle. Fire, burns or electric shock may result. If a thunderstorm is nearby, do not touch the adapter. Otherwise, you may receive an electric shock.
Introduction Do When unplugging the power plug from the power outlet or cigarette lighter socket, do not yank the adapter cord, but take hold of the adapter to unplug it. Fire, burns or electric shock may result. Do When inserting or pulling the adapter into or out of the FOMA terminal, without using unnecessary force and insert or pull it horizontally straight. Fire, burns, injury or electric shock may result.
List of materials used ■P-01G Handset/Back Cover P62/Battery Pack P31 Connector Body terminal Fitting pin cover area Packing Panel of camera lens area, Display panel, Sub-display panel Side key Charging terminal Material/Finishing PC/UV coating Stainless steel/ nickel plating, tin plating PC/UV coating Polyester series elastomer Silicon rubber PMMA/hard coating ABS Brass/nickel plating, nickel palladium plating, gold plating Key area, Sheet area of Acrylic urethane numeric key surface Stainless steel/
Introduction 14 ■Use a dry soft cloth such as the one for cleaning glasses to clean the equipment. The display may be scratched if it is rubbed hard with a dry cloth. Stains may result from droplets of water or dirt if they are left on the display. Do not use alcohol, thinner, benzene, detergent or other solvents for cleaning, otherwise the printing may be removed or discoloration may result. ■Occasionally clean the terminals of the equipment using a dry cotton swab, etc.
■ Do not use the DC adapter for charging the ■Do not drop the docomo mini UIM card battery when the car engine is not running. or subject it to strong impacts. Malfunction may result. The car battery could go flat. ■When using the power outlet having the ■Do not bend the docomo mini UIM card disengaging prevention mechanism, or place something heavy on it. observe the instructions given in that Malfunction may result. instruction manual. ■Into the FOMA terminal, do not insert ■Do not give a strong shock.
■Radio frequencies The radio frequencies for the Bluetooth function of the FOMA terminal are as follows: Introduction 2.4 FH 1 16 ：Indicates radio facilities that use 2400 MHz frequencies. ：Indicates modulation is the FH-SS system. 1 ：Indicates that an estimated interference distance is 10 meters or less. ：Indicates that all radio frequencies 2400 MHz through 2483.5 MHz are used, and that the frequencies for mobile object identifiers shall not be avoided.
Waterproof/Dust-proof Performance Sea/pool Introduction Your P-01G is capable of IPX5※1 and IPX7※2 waterproof performance and IP5X※3 dust-proof performance if the connector terminal cover and back cover are firmly closed and no clearance gap and float found in them. ※1 IPX5 means that the P-01G maintains its performance as a phone even after a water jet flow has been sprayed over the FOMA terminal from all directions under conditions where water in a volume of 12.
Introduction Opening/Closing the Connector Terminal Cover Removing/Attaching the Back Cover ■Opening the connector terminal cover ① Hook your fingertip over the groove, pull out the cover to direction A, and rotate it as direction B. ■Removing the back cover ① Hook your fingertip over the concave part of the FOMA terminal, lift up in the direction of the arrow to remove the back cover.
Caution ･ Even the slightest sands entered from the connector terminal cover or back cover could cause water or dust to enter the inside of the FOMA terminal. ■About the connector terminal cover and back cover Do not open or close them with gloves put on hands. Fine dirt might adhere to the contact surface of the packing. Be careful that no fibers adhere to the packing when you try to wipe off moisture with a clean dry cloth. Do not peel the packing off.
Introduction If you operate the FOMA terminal with water drops left adhered to, the volume level from the speakers might be decreased or sound quality vary. Moisture may have entered inside through the clearance gap of the keys or hinges.
Before Using When you remove the docomo mini UIM card Pull out the tray, and then slide the docomo mini UIM card slowly to pull it out. After pulling out the tray until about half of the docomo mini UIM card is visible, pull out the docomo mini UIM card by sliding it out. Attaching docomo mini UIM card/ Battery Pack To insert the docomo mini UIM card/battery pack, remove the back cover and insert. (See page 18) Insert the docomo mini UIM card. 1.
4 Charging Charging Using Desktop Holder Call/Charging indicator AC Adapter’s plug Basic Operation Engraved surface 22 When charging is completed, hold the desktop holder and lift up the FOMA terminal to remove. Charging Using AC Adapter Power socket Power socket AC Adapter With the engraved surface of the connector of the AC Adapter (option) face up, plug the connector straight into the connector terminal of the desktop holder provided.
For detaching, pull out the connector horizontally while pressing the release buttons. Malfunction could result if you try to pull it forcibly. When charging starts, the Call/Charging indicator lights in red. When charging is completed, it turns off. Notifying Your Caller ID on the Other Party’s Phone 1 Deactivate▶ON Turning Power ON Press and hold h for at least one second. After the notes of waterproof and Wake-up display are displayed, the Stand-by display appears. To turn off the power 1.
Screen Explanation Viewing Display/Icon Status icon Battery level (estimate) ··········· A Bluetooth device is connected. Basic Operation ··········· A microSD card is inserted. Full Low When is shown, charge the battery. Depending on the usage state, the battery level indication might significantly vary. Radio waves reception level (estimate) Strong Weak ············ You are out of the FOMA service area or radio waves do not reach. ·········· Vibrator is set.
Notification icon ······ New i-mode mail or SMS ······ Missed call ······ Record message ······ Videophone record message ····· 1Seg has automatically terminated (ECO NAVI). Stand-by shortcut ····· i-concier ····· dmarket ····· 地図アプリ (Map Application) ····· Guide Proceed to respective functions from icons, etc. You can proceed to respective functions by selecting “Status icon”, “Notification icon”, “Stand-by shortcut”, or date and time. 1. Oo▶Use Mo to highlight an icon, etc.
Navigation Displays and Key Operations Operating Command Navigation Key Basic Operation Key operations you can perform while you are operating a function are shown at the bottom of the display. (Navigation displays) ■Key assignments and basic navigation displays Moves the cursor or highlighted display up. (Hold down to scroll continuously.) Scrolls the page up. Vo Moves the cursor to the right. Scrolls forward page by page. (Hold down to scroll continuously.) Oo Fixes the operation.
Simple Menu Menu Operation Main Menu Press m from the Stand-by display to show Main Menu. In this manual, the descriptions of operating procedures are given mainly starting with the Stand-by display. Submenu When “ ” is displayed at the lower left of the display, you can use functions such as Store, Edit, and Delete by pressing m. Menu icon name In this manual, the item Display the submenu of a Phonebook entry names shown here are described in operating procedures, etc.
Functions Starting with Simple Operation Depending on the function, you can start it either by selecting a menu item or by key operation from the Stand-by display. The following are the functions you can start by pressing keys for at least one second. Basic Operation Key Performance Key x Performance Activates/Deactivates Manner Mode. Multi One-touch Function You can easily call up frequently used functions and Phonebook which have been registered in multi one-touch keys.
Using MyFACE docomo Palette UI The docomo Palette UI is a user interface that allows you to easily access a variety of functions and services from the center of the Stand-by display. You can freely customize this interface. The MyFACE display appears to the left and right of the Stand-by display, and the Shortcut display appears below. MyFACE is a convenient function that allows you to download MyFACE content from a site and register the content to the left or right of the Stand-by display.
Using Shortcut A list of shortcuts appears at the bottom of the Stand-by display. By creating shortcuts to, for example, functions you use frequently, you can use certain functions immediately. Basic Operation 1 2 Press Xo. Use No to highlight a Stand-by shortcut and press Oo( ). You can start the shortcut. Stand-by shortcut 1 m▶便利ツール (Tool) ▶使いかたガイド (Guide) Press Xo. 2 3 Use Mo to highlight a shortcut and press Oo( ). Creating Shortcuts 1.
Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. 1 Select a input mode. Press l( Enter characters. By repeatedly pressing a numeric key, you can enter other characters assigned to the key.
Sound/Screen Setting Changing Ring Tone Changing the ring tone for incoming voice calls Basic Operation 1 m▶Setting▶Sound/Vib./Manner ▶Select ring tone▶Phone※▶Select ring tone▶Select a type of ring tone▶Select a folder▶Select a ring tone. ※To set a ring tone for mail messages, videophone calls, and so on, select the corresponding item. Adjusting Ring Volume Adjusting the ring volume for incoming voice calls 1 m▶Setting▶Sound/Vib.
Setting Keypad Sound OFF 1 m▶Setting▶Sound/Vib./Manner ▶Other sound setting▶Keypad sound ▶OFF 1 m▶Setting▶Screen/Display ▶Stand-by display▶Stand-by display ▶Select a type of image▶Select a folder ▶Select an image. You may be able to select a display format depending on the image. Changing Display Brightness Making Display Easy to See Outdoors In order to see the display clearly in sunlight for outdoor use, you can set “Outdoor mode”. 1 Press and hold 7 for at least one second.
Making Display Hard to See from People Around Using Kisekae Tool You can set the ring tone, Stand-by display, menu icons and others at a time. You can set “View blind” to make it harder for the people around you to see the display from oblique angles. 1 Press and hold 8 for at least one second. Basic Operation “ ” appears on the Stand-by display.
Switching to the eco Mode eco Mode Autostart With a single key press, you can set the eco Mode that reduces This setting ensures that the mode will be automatically set to the eco Mode when the remaining battery level has battery consumption. Changing to eco Mode affects items dropped to the set level or less. specified in “eco mode setting”, e.g. dimming the display. “Battery level” of “eco mode autostart” is set to “40%” in Press and hold 5 for at least one second. default.
Lock/Security Basic Operation Various Security Codes ■Caution on security codes You should avoid using the numbers for security codes such as denoting your birth date, part of your phone number, local address number, room number, “1111” or “1234” that is easily decoded by a third party. Also make sure that you take a note of the security codes you have set just in case you forget them. Take care not to let others know your security codes.
PIN1 Code/PIN2 Code “0000” at the time of your contract PIN Unblocking Key (PUK) To change 1. m▶Setting▶Lock/Security▶UIM setting▶Enter your Terminal Security Code▶Change PIN1 code or Change PIN2 code You need to set “PIN1 code entry set” to “ON” to change The PIN unblocking key (PUK) is the eight-digit number for releasing the blocked PIN1 code and PIN2 code. You cannot change this code by yourself.
Various Lock Functions A variety of lock functions is installed on your FOMA terminal such as preventing illegal use of a third party, or protecting your private information. Basic Operation Dial Lock IC Card Lock You can set your FOMA terminal not to be used by a third party. You can do no operations other than answering calls and turning on/off the power. 1.
Setting Incoming Call Restriction Resetting to Default You can set whether to receive (accept) or not to receive Resetting the Function Settings to Default (reject) incoming calls depending on the reason, such as You can reset each function setting to the default. from the parties which has not been registered in Phonebook or incoming calls from any parties who do not notify you of m▶Setting▶Other setting their phone numbers.
Call Telephone 2 When an entry contains multiple phone numbers, press No to select a desired phone number. ) to make a videophone call. Press c( Making a Call/Videophone Call Making a Call by Entering the Phone Number Connect 1 Enter a phone number starting with a city code▶Press d to make a call ▶Press h to end the call. Press c( ) to make a videophone call. You can put a call on hold by pressing r during a call. You can release held call by pressing r.
Making an International Call You can use WORLD CALL to make an international call from Japan. When using international carriers other than DOCOMO, contact them. 1 1 A call comes in▶Press d to answer the call▶Press h to end the call. When a videophone call comes in You can receive the videophone call the same way as with a voice call. The substitute image is sent to the other party. Adjusting Earpiece Volume You can enter “+” by pressing and holding 0 for at least one second.
Using Public Mode (Drive Mode) Once you activate Public mode (Drive mode), the guidance is played back telling that you cannot answer the call as you are currently driving or in a public place (such as a train, bus or movie theater) where you should refrain from speaking on the phone. Then, the call is disconnected automatically. 1 Press and hold a for at least one second. Connect “ ” appears on the Stand-by display. To deactivate Perform the same operation.
Using Voice Mail Service Using Call Forwarding Service 1 1 m▶TEL function▶Voice mail service To activate the service 1. Activate▶YES You can also specify a ring time. To play back the message 1. Play messages▶Play (voice call) or Play (videophone) ▶YES▶Operate following the voice guidance. 1 m▶TEL function▶Other network serv. ▶Call waiting To activate the service 1. Activate▶YES To activate the service 1.
Emergency Call Connect Emergency Calls Calls to police Calls to fire station and ambulance Calls for accidents at sea 44 Phone number 110 119 118 This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/119/118, information about the place where you are dialing from (location information) is automatically notified to emergency-response agencies such as police stations.
Making a Call to Outside the Country You Stay in Available Service Overseas Major Communication Service Voice call※1 Videophone call※1 SMS i-mode※2 i-mode mail i-channel※2※3 i-concier※4 i-Widget※5 Packet communication by connecting with a personal computer 3G ○ ○ ○ ○ ○ ○ ○ ○ 1 →area code (city code) →destination phone number. 2 Press d to make a call. Press c( Connect You can enter “+” by pressing and holding 0 for at least one second.
Sending Deco-mail Mail Connect Sending i-mode Mail Once you subscribe to i-mode, you can exchange e-mail messages with anyone who has the e-mail address of internet, even if it is a another company’s mobile phone/ smartphone or personal computer as well as DOCOMO each other. You can attach within 2 MB of up to 10 files (photos, moving pictures, etc.) with body text added. In addition, this FOMA terminal supports Deco-mail.
Sending Decome-Anime You can create impressive messages by inserting text or images into a Flash file. 1 l▶Create new Deco-Anime ▶Enter an address and subject. 2 Forwarding i-mode Mail 1. m( ) while an i-mode mail is displayed ▶Reply/Forward▶Forward▶Enter each item ) ▶c( Checking New i-mode Mail You can check the i-mode Center for a new mail message or Displaying Received i-mode Mail 1 l▶Inbox▶Select a folder ▶Select an i-mode mail message.
Early Warning “Area Mail” Connect Receiving Area Mail You can receive information such as about earthquake alerts that are issued from the Japan Meteorological Agency as an Area Mail message. ” lights and the When an Area Mail message arrives, “ buzzer or ring tone for Area Mail sounds. The received contents of some messages are automatically displayed. To erase the displayed content, select “OK”. You can receive Area Mail messages even when you are not contracted to use i-mode.
Phonebook Storing Phonebook Entries Storing New Phone Numbers/Mail Addresses, etc. Storing Phonebook Entries from Dial/ Received List 1 m( You can store Phonebook entries in the FOMA terminal (Phone) or on the docomo mini UIM card. 1 Zo (for at least one second)▶Phone The display for entering a name appears. Enter a name and proceed. 2 Enter a reading. Enter a phone number. Enter a mail address. 3 Press c( ) Editing Phonebook Entries 1 Enter each item. Enter a name.
i-mode/Full Browser Displaying i-mode Sites i-mode is a service that enables you, by using the display of the mobile phone supporting i-mode, to use online services such as site access, Internet access, and i-mode mail. i-mode is a pay service that is available on a subscription basis. For details on i-mode, refer to DOCOMO website. You can display SSL/TLS※-compatible pages via FOMA terminal.
Displaying Websites Designed for PC You can browse Internet websites designed for PCs using the Full Browser function. Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data. For details on the packet communication fee, refer to DOCOMO website. You can browse Internet websites composed of frames. You can select a frame to display it as well.
Storing Frequently Accessed Sites Bookmark websites or i-mode sites you frequently visit to get them displayed easily. i-channel This service distributes information such as news and weather forecast to i-channel mobile phones. The automatically received latest information flows on the Stand-by display by m( ) while the site is displayed tickers. You can read it on the i-channel list by pressing *r.
Camera Shooting Still Images/Moving Pictures Viewing and Operation of Finder Display Shooting Still Images For Digicam mode ❶MENU You can check the settings. ❶ ❷Key operation guidance ❷ ❸Focus frame When a subject is focused on, the frame becomes green. ❸ ❹Zoom bar The zooming status is displayed.
Shooting Still Images Using Auto Timer Viewing Still Images/Moving Pictures after Shooting You can display the still image or the moving picture you have shot in Picture Album. You can detect a person’s face on the still image you have shot and expand it. You can also play expressive slide shows with the effect function. 1 m▶Data box▶My picture or imotion/ Movie▶Picture album Picture Album is also activated by pressing l( from the Finder display. 2 ) ).
※Channels might be reorganized along with the discontinuation of analog broadcasting. For this reason, you might need to reset the channels by using an Using 1Seg automatic scan (see page 56). After resetting the channels, be sure to register the channels to the channel list. For ■Using 1Seg details about channel changes accompanying terrestrial 1Seg is a service provided by television entrepreneurs digital broadcasting, check resources such as the (broadcasting stations).
Setting Channels Viewing and Operating Viewer Display When you activate 1Seg for the first time or change the area you are in, you need to operate “Channel setting”. Select “Auto channel setting” to enable you to search automatically for broadcast stations you can watch. You need to set this function when you are in a terrestrial ❶ digital TV broadcasting service area. 1 m▶CAMERA/TV/MUSIC▶1Seg ▶Channel setting▶Auto channel setting ❹ ❺ ❻ ❼ ❷ ▶YES▶YES▶Enter a title.
The operation on the viewer display Channel switch: No Sound volume adjustment: Bo Mute/Unmute: r Switch TV/data BC: l Video recording: Oo( ) (for at least one second) or x (for at least one second) The recorded video is saved on the microSD card. Setting Timer Watching or Recording 1Seg Set the date and time, a channel, and program name, and enter them to the TV Timer List or Timer Recording List. When the set time arrives, you can start watching or recording.
You cannot save WMA files to the FOMA terminal. A license protected WMA file cannot be saved to the FOMA terminal or the microSD card. For how to operate Windows Media Player 11/12, refer to Help for Windows Media Player 11/12. When you finish saving, remove the FOMA USB Cable with Charge Function 02 from the FOMA terminal. When you remove the FOMA USB Cable with Charge Function 02, remove it after finishing the software in use.
i-appli/i-Widget i-appli is a software program for mobile phone supporting i-mode. By downloading various software programs from the i-mode site, you can automatically update the stock price information or weather information, and enjoy games. i-Widget is a useful function for gaining easy access to frequently used contents and tools (Widget Appli programs) such as the calculator, clock, memo pad and stock market information. Widget Appli programs can be added by downloading them from the web site.
Downloading i-motion i-motion i-motion is a file consisting from video, audio, and music which you can download to your FOMA terminal from i-motion sites that support i-motion. You can also set it for a ring tone. When downloading or streaming an i-motion file, you might receive a bulky file. When data size required for sending or receiving is bulky, packet communications fees will be a large sum. You are advised to use i-mode packet flat-rate service.
Osaifu-Keitai Osaifu-Keitai/ToruCa 1 More Convenient Osaifu-Keitai is equipped with the IC card which enables you to make payments, use coupons, enjoy stamp rallies and so on by placing the FOMA terminal over the scanning device in the stores or other locations. Furthermore, by placing the FOMA terminal over a scanning device, you can access sites and web pages, obtain the latest coupons by communication, and check the deposits of electronic money and the status of its use.
More Convenient i-concier 62 i-concier works to serve you with a pleasant life just like a clerk or concierge does. The service holds your data (area information about your neighborhood, Memo, Schedule, ToruCa, Phonebook, etc.) and sends you information, with good timing, about a variety of things according to the contents of your memo and your schedule event, your living area, your current location, or your preference or taste.
Using Start by Voice You can call up the function by voice. This function is available in Japanese mode only. The first time you use this function, select “利用する (Use)” ). on the usage information display, or press c( 1 When the function to be called up cannot be specified, you can look it up in “使いかたガイド (Guide)”. ■Note when using Shabette-Kensaku or Start by Voice Speak as clearly as possible, in natural conversation speed. Speak in quiet, noise-free locations.
More Convenient Using Bar Code Reader 64 You can use the camera to scan QR codes and others, and store them as files. From the scanned data, you can make calls, compose i-mode mail messages, access Internet websites, and so on. ■When scanning with Bar Code Reader Guide frame Scan the code as large as possible within the guide frame. Autofocus works when you scan the code about 10 cm or more away from it. When you scan the code in the out-of-focus state, the recognition rate lowers.
Bluetooth Function Connecting with Bluetooth Devices You can connect your FOMA terminal to a Bluetooth device, and can talk on the phone or play music files. 1 Registering a Bluetooth Device to FOMA Terminal 2 You can search and register a Bluetooth device to the FOMA terminal. You need to place the Bluetooth device to be registered standby for registration beforehand.
Data Management More Convenient Using microSD Card 66 If you do not have a microSD card, you need to purchase it. P-01G supports a commercial microSD card of up to 2 GB and microSDHC card of up to 32 GB (As of September 2014). For the latest operation, check information such as the memory capacity and manufacturers of microSD cards, access the following sites (in Japanese only). For the microSD cards other than published in the sites, contact each microSD card maker.
Icons on the Display Formatting microSD Card : A microSD card is inserted. When you use the microSD card for the first time, you need to format (initialize) it. Be sure to use P-01G for formatting. The microSD card formatted using other devices such as personal computers may not work properly. Note that formatting deletes all content on the microSD card. : Data is being read/written. (Do not remove the microSD card nor turn off the FOMA terminal.) : The microSD card is write-protected.
Copying Data to FOMA Terminal Backing up Data to microSD Card Copying a still image You can back up Phonebook entries, schedule events, mail messages, memos, bookmarks, and the settings on and information about your FOMA terminal collectively onto the microSD card. When restoring the backup data onto your FOMA terminal, they are collectively restored.
Sending/Receiving Data by Infrared Communication/iC Communication You can send or receive data such as Phonebook entries to or from a device supporting infrared communication function or iC communication function. You cannot exchange data depending on the other party’s device or FOMA terminal. Sending Data For infrared communications, set the receiving end terminal first, and then start sending data within 60 seconds.
More Convenient Connecting to a PC 70 You can connect the FOMA terminal to a personal computer to exchange WMA files, images or other files stored on microSD card. You can also access the Internet to perform data communication. ※You need the FOMA USB Cable with Charge Function 02 (option). ※To perform data communication, you need to install the “FOMA communication configuration file” (driver). For details, refer to “Manual for PC Connection”.
Support Troubleshooting First of all, check to see if you need to update the software program and then update it if necessary. See page 75 for how to update software programs. When symptom persists even after you check the countermeasures for the problem you suffer, contact the “Repairs” counter listed on the back page of this manual or a repair counter specified by DOCOMO. The “Repairs” counter is available in Japanese only. Power source The FOMA terminal does not turn on.
Pressing keys is disabled. …Make sure Dial Lock is deactivated. (See page 38) …Make sure Keypad Lock is deactivated. (See page 38) …Make sure Side Key Guard is set to “OFF”. The docomo mini UIM card is not recognized. …Make sure you insert the docomo mini UIM card in the correct direction. (See page 21) The clock does not show the correct time. …The clock may not show the correct time when the power has been kept on for a prolonged period of time.
Warranty and After-sales Service After-sales Services ◎When there is a problem with the FOMA Warranty terminal Make sure that you have received a warranty Before asking repairs, check card provided at purchase. After checking “Troubleshooting” in this manual or in “使 the contents of the warranty card as well as いかたガイド (Guide)” mounted on the “Shop name and date of purchase”, keep FOMA terminal. (“使いかたガイド (Guide)” the warranty card in a safe place. If you is available in Japanese mode only.
Others ■Spare parts availability period The minimum storage period of the performance spare parts (parts required for maintaining performance) for the FOMA terminal is basically four years after the closure of its production. Note, however, that your FOMA terminal might not be repaired depending on the troubled portions because of the shortage of spare parts. ◎Other points to note Make sure not to modify the FOMA terminal or its accessories.
Error Information Send Setting Updating Software When an error occurs on the FOMA terminal, the error This function is to check whether you need to update information is created automatically and send it to DOCOMO software programs in the FOMA terminal by connecting to if this function is set to “ON”. the network, and if necessary, you can download some parts of software programs using packet communication, and can m▶Setting▶Other setting update the software programs.
You are advised to update software programs when radio wave is strong enough with the three antennas displayed and while you are not moving. If radio wave conditions get worse while downloading software programs, or download is suspended, move to a place with better radio wave conditions and try again to update software programs. When updating software programs, the proprietary information about your FOMA terminal (model name or serial number, etc.
Scanning Function You can detect data or application programs, which might cause troubles, from among those downloaded to your FOMA terminal, and then can delete the data or stop starting the application programs. This scan function provides a certain protective measure to filter out data that might cause troubles with your FOMA terminal at the time when you browse websites or receive messages.
The highest SAR value for this mobile phone when tested for use at the ear is 0.955 W/kg and when worn on the body 0.583 W/kg※2. There may be slight differences between the SAR levels for each product, but they all satisfy the limit. The actual SAR of this mobile phone while SAR Certification operating can be well below that indicated Information above.
European RF Exposure Information *** Tests for SAR have been conducted using FCC Notice standard operating positions with the phone transmitting at its highest certified This device complies with part 15 of the FCC Rules. power level in all tested frequency bands. This mobile phone complies with the EU Operation is subject to the following two Although the SAR is determined at the requirements for exposure to radio waves.
Others 80 The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
microSDHC Logo is a trademark of SD-3C, LLC. “FOMA”, “i-mode”, “i-appli”, “i-motion”, “Deco-mail”, “WORLD CALL”, “i-area”, “Multitask” is a registered trademark of NEC This product and its accessories might be “WORLD WING”, and the logos of “i-mode”, Corporation. covered by the Japan Export Administration “i-appli” are trademarks or registered “AXIS Font” is a trademark of AXIS Inc., and Regulations (“Foreign Exchange and Foreign trademarks of NTT DOCOMO, INC.
Others Other company names and product names described in the text are trademarks or registered trademarks of those companies. 82 This product contains software licensed complying with GNU General Public License, Version 2 (GPL v2), GNU Lesser General Public License (LGPL), etc.
The HMM-Based Speech Synthesis Engine in this product uses the Simplified BSD License. -------------------------------------------------The HMM-Based Speech Synthesis System (HTS) hts_engine API developed by HTS Working Group( http://hts-engine.sourceforge.
Unlocking SIM Others This FOMA terminal supports SIM unlock. When the SIM is unlocked, other operator company’s SIM cards can be used with your FOMA terminal. Contact your nearest docomo Shop for unlocking SIM. You are charged separately a charge for unlocking SIM. If other operator company’s SIM is used, restrictions may be applied to some of the services or the functions. Note that NTT DOCOMO, INC. cannot provide any guarantees for operating the FOMA terminal when using other company’s card.
Index Channel setting....................................56 A Character entry ....................................31 AC adapter ...........................................22 Line feed ...........................................31 After-sales service ...............................73 Pictograms........................................31 Alarm ....................................................63 Smiley ...............................................31 Antenna .................................................
Others IC Card Lock ........................................38 iC Communication ...............................69 i-channel ..............................................52 i-concier ...............................................62 Illumination setting ..............................34 i-mode ..................................................50 i-mode mail ..........................................46 Compose ..........................................46 Forward .............................................
R Radio waves reception level ...............24 Receiving a call ...................................41 Receiving a videophone call ...............41 Record message .................................41 Reset settings ......................................39 Ring volume .........................................32 S WORLD CALL ......................................41 WORLD WING......................................44 Numerics 1Seg .....................................................55 1Seg antenna .........
Access the following for checking or changing the contents of your contract, or for applying to respective services, and asking for related documents: From i-mode ｉMenu ▶ お客様サポート (User support) ▶ お申込・お手続き (Applications/Procedures) ▶ ドコモオンライン手続き (Respective applications/procedures) Packet communication charges free From PC My docomo (https://www.nttdocomo.co.jp/mydocomo/) ▶ ドコモオンライン手続き一覧 “お客様サポート (User support)” and My docomo are available in Japanese only.
