User's Manual Part 2
18-27
18
Abridged English Manual
Security Codes
PIN1&PIN2
! PIN1 & PIN2 are 9999 by default.
! PIN1 & PIN2 can be changed.
! When PIN Entry is
Enable
, PIN1 (4-8 digits) is required
every time handset is turned on (with USIM Card
inserted).
PIN Lock & Cancellation (PUK)
PIN1 Lock or PIN 2 Lock is activated if PIN1 or PIN2 is
incorrectly entered 3 times. Cancel PIN Lock by entering
the Personal Unblocking Key (PUK).
! For information on PUK, contact SoftBank Customer
Centre, General Information (ZP.18-50).
Handset Code
9999 or the 4-digit number selected at initial subscription.
Handset Code is required to use/change some handset
functions.
!
"
appears when Handset Code is entered.
Centre Access Code
The 4-digit number in the contract; required to access
optional service via landlines or subscribe to fee-based
information.
USIM PINs
PIN1 Prevent unauthorised use of handset.
PIN2
Required to clear Total Call Cost and to set Cost
Limit.
! If PUK is incorrectly entered 10 times, USIM Card is
locked and handset is disabled. Write down PUK.
! For procedures required to unlock USIM Card,
contact SoftBank Customer Centre, General
Information (ZP.18-50).
! When PIN Entry is
enabled
, emergency calls are
not available.
Codes
705P.bookPage27Tuesday,August1,20065:35PM