User's Manual Part 1

100
Sound/Screen/Light Settings
You can set the vibrator to notify you of incoming calls
and mail.
1
m Settings  Incoming call  Vibrator
 Select an incoming type
 Select a vibration pattern.
Pattern 1 . . . . . . . . Alternates between vibration on
(about 0.5 second) and off (about
0.5 second).
Pattern 2 . . . . . . . . Alternates between vibration on
(about 1 second) and off (about 1
second).
Pattern 3 . . . . . . . . Alternates between vibration on
(about 3 seconds) and off (about 1
second).
Melody linkage . . . Vibrates in time with the vibration
pattern stored in the melody.
OFF . . . . . . . . . . . . Does not vibrate.
p While you are selecting a pattern, the FOMA phone
vibrates by the selected pattern for confirmation.
However, it does not vibrate if you select “Melody
linkage”.
p The following icons are displayed on the Stand-by
display while the vibrator is set:
: Vibrates for incoming voice calls, PushTalk calls or
videophone calls.
: Vibrates for incoming mail, chat mail or Messages
R/F.
: Vibrates for incoming voice calls, PushTalk calls or
videophone calls, and vibrates for incoming mail,
chat mail or Messages R/F.
+m-5-4
Vibrator
Informing You of an Incoming
Call by Vibration
<>
Information
p The priority order of vibrators is as follows: “Setting for
Phonebook entry”
→ “Group setting” → “Vibrator”.
p The vibrator vibrates at a regular strength, regardless of the
ring volume level.
p Even when “Melody linkage” is set, the FOMA phone
vibrates with “Pattern 2” if an i-motion movie or melody with
no vibration pattern is set for the ring tone.
p Be careful not to leave the FOMA phone on a desk or
similar places with the vibrator activated; when a call comes
in, the FOMA phone might move and fall by vibration.
You can set the sound you recorded with the FOMA
phone for a ring tone (including a ring tone for Number
B of 2in1), On hold tone/Holding tone, alarm for
“Alarm”, “Schedule”, “ToDo”, and “Book program”,
and an answer message for Record Message.
You can record only one item for about 15 seconds.
1
m LifeKit  Rec.msg/voice memo
 Voice announce  Record
p To suspend recording midway, press Oo (),
h , or r . The contents recorded to that point are
saved.
p The tone beeps about 5 seconds before the recording
time (for about 15 seconds) ends.
When recording ends, the tone beeps twice, and the
former display returns.
p The recording is suspended when a call comes in, when
an alarm for “Alarm”, “Schedule”, “ToDo”, “Book
program”, or “Timer recording” sounds, or when you
switch displays using Multitask during recording. (The
contents recorded to that point are saved.)
p To play back the recorded sound, select “Play”. To
suspend playback midway, press
Oo (), h ,
or
r .
p To erase the recorded sound, select “Erase”, then
select “YES”.
Melody Call is a service that changes the ringing tone
phone callers hear, to a melody you like.
For details, refer to “Mobile Phone User’s Guide
[Network Services]”.
p Melody call is a pay service which is available on a
subscription basis.
1
m Settings  Melody Call setting  YES
 Follow the instructions on the display.
+m-5-5
Voice Announce
Using Recorded Sound as Ring
Tone
<>
Melody Call Setting
Changing Calling Tone
<>
Information
p Melody Call is not available for incoming videophone calls
and PushTalk calls.
p When you select “YES” from the confirmation display asking
whether to connect to the site, the line is connected to the
i-mode site. You are not charged a packet communication
fee for connecting to the site for settings, however, you are
charged for connecting to the IP site, i-mode menu site, and
free melody corner.