User's Manual Part 1
118
Security Settings
For some functions of the FOMA phone, you need to
enter your password. In addition to the Terminal
Security Code for operating respective mobile phone
functions, the Network Security Code to use network
services, and i-mode password are available. These
passwords help you utilize your FOMA phone.
The Terminal Security Code is set to “0000” at purchase
but you can change it by yourself. (See page 119)
When the display for entering the Terminal Security
Code appears, enter your four- to eight-digit code and
press
Oo
().
p
When you enter your Terminal
Security Code, the entered numbers
are indicated by “_” and not displayed.
p
If you have entered wrong numbers or
nothing for about 15 seconds, a warning tone sounds and a
warning message is displayed; then the display prior to
entering the Terminal Security Code returns. Check the
correct code and retry entering numbers.
The Network Security Code is a four-digit number for
procedures on DoCoMo e-site or for using network
services. This is determined at the time of contract but can
be changed by yourself.
If you have “DoCoMo ID/Password” for “My DoCoMo”, the
overall support site for personal computers, you can use a
personal computer to take proceedings of changing your
Network Security Code to new one. Also, you can change
it by yourself from “
各種手続き
(procedures)” on DoCoMo
e-site by using the i-mode phone.
※
For “My DoCoMo” and “DoCoMo e-site (
ドコモ
e
サイ
ト
)”, see the back page of this manual.
Passwords
■
Cautions on passwords
p
You should avoid using the numbers for passwords such
as denoting your birth date, part of your phone number,
local address number, room number, “1111” or “1234” that
is easily decoded by a third party. Also make sure that you
take a note of the passwords you have selected just in
case you forget them.
p
Take care not to let others know your passwords. Even if
your passwords are known and used by a third party, we at
DoCoMo take no responsibility in any event for the
resultant loss.
p
Note that we at DoCoMo will never make any inquiries
about your passwords.
p
If you do not remember your respective passwords, you
need to bring an identification card such as your driver’s
license, the FOMA phone and UIM to the handing counter
of a DoCoMo shop.
For details contact “DoCoMo Information Center” on the
back page of this manual.
Terminal Security Code
Network Security Code
You need to enter the four-digit “i-mode password” for
registering or deleting My Menu, applying for or
canceling Message Services, i-mode pay service, and
so on.
(Some information providers may provide you with
their specific password.)
The i-mode password is “0000” at the time of your
contract, but you can change it by yourself. (See
page 156)
From i-mode, you can change the i-mode password by
following operation:
“
i
Menu”
→
“English iMenu”
→
“Options”
→
“Change
i-mode Password”
For the UIM, you can set the two security codes,
namely the PIN1 code and PIN2 code.
These security codes are “0000” at the time of your
contract, but you can change them by yourself. (See
page 119)
The PIN1 code is the four- to eight-digit number for
checking the user each time the UIM is inserted into the
FOMA phone or each time the FOMA phone is turned
on, so that you can prevent the third party from using
your UIM. By entering your PIN1 code, you can make or
answer calls, or use functions in the FOMA phone.
The PIN2 code is the four- to eight-digit number for
executing Reset Total Cost, using the user certificate or
applying for the issue of it, etc.
p
If you purchase a new FOMA phone and use the existing
UIM with the new FOMA phone, use the PIN1 code and PIN2
code you have set previously.
When the PIN1 Code/PIN2 Code Entry display appears,
enter your four- to eight-digit PIN1 code/PIN2 code and
press
Oo
().
p
The entered PIN1 code or PIN2 code
is displayed as “_”.
p
If you enter a wrong PIN1 code or
PIN2 code three times in succession,
it is locked and the FOMA phone
cannot be used. (The remaining
number of times you can enter
appears on the display.)
When you enter the correct PIN1 code or PIN2 code, the
remaining number of times you can enter will return to three
times.
p
You can make emergency calls at 110/119/118 even from
the PIN1/PIN2 Code Entry display.
i-mode Password
PIN1 Code/PIN2 Code
For PIN1 code