User's Manual Part 1
67
Voice/Videophone Calls
※
When the ring time is set to 0 seconds, the Public Mode
(Power Off) guidance is not played back, but Voice Mail
Service or Call Forwarding Service works.
When you could not answer calls (Missed calls), the
“Notification icon” appears on the Stand-by display.
You can check Received Calls by selecting the icon.
1
OoOo
()
p
Press
h
or
r
to return to the former display.
p
When multiple icons are found, use
Mo
to highlight an
icon and press
Oo
().
p
See page 30 for when the FOMA phone is closed.
By activating Record Message, you can play back an
answer message to incoming calls and record callers’
voice/video messages when you cannot answer them
even if you have not signed up for Voice Mail Service.
You can record up to five messages for voice calls and
up to two messages for videophone calls. Each
message can be recorded for up to 20 seconds.
Caller ID
Display
Request
Service
For the caller without a
caller ID, plays back
the Caller ID Request
guidance, and then the
call is disconnected.
For the caller with a
caller ID, plays back
the Public Mode
(Power Off) guidance,
and then the call is
disconnected.
For the caller without a
caller ID, plays back
the video guidance for
Caller ID Request, and
then the call is
disconnected.
For the caller with a
caller ID, plays back
the video guidance for
Public Mode (Power
Off), and then the call is
disconnected.
Missed Call
If You could not Answer an
Incoming Call
Service
Responses to
Incoming Voice Calls
Responses to Incoming
Videophone Calls
<>
Notification icon
+m-5-5
Record Message Setting
Recording Voice/Video Messages
when You cannot Answer the Call
<>
1
m
LifeKit
Rec. msg/voice memo
Record message setting
ON or OFF
Select an answer message.
p
Press
l
( ) to play back the answer message.
Press
r
to end the demo playback.
p
When “Japanese 1”, “Japanese 2”, or “English” is set, a
beep sounds after playing back the answer message to
the other party. If “Voice announce” is set, the beep
does not sound.
2
Enter a ring time (seconds).
p
Enter from “000” through “120” in three digits.
p
You cannot set the same ring time for Remote
Monitoring, Auto Answer Setting and Record Message
Setting. Set a different time for each.
p
While Record Message is activated, “ ”
〜
“” (the
number of recorded messages for voice calls) and “ ”
〜
“ ” (the number of recorded messages for
videophone calls) are displayed.
Activate Record Message
■
Incoming calls when Record Message Setting is set to “ON”
For videophone calls, the still image set for “Preparing” of
“Select image” is displayed on the other party’s display while
playing back the answer message, and the still image set for
“Record message” of “Select image” is displayed while
recording.
p
To answer a call while the answer message is played back or
a voice/video message is recorded, press
Oo
() or
d
.
For videophone calls, press
Oo
() or
d
to send
the image through your camera, or press
m
() to
send a substitute image.
You can answer a call also by pressing the switch on the
Flat-plug Earphone/Microphone with Switch (option). For
videophone calls, the image through your camera is sent to
the other party.
Incoming Call Playing back the
answer message
Recording a voice/
video message
Displaying an icon on the
desktop (See page 112)
The ring
time
elapses
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ