User's Manual Part 1

71
Voice/Videophone Calls
Send DTMF
tone/
DTMF tone
OFF
During a Chara-den call, you can switch to the
DTMF Transmission Mode that enables you
to enter the data from the numeric keys and to
send DTMF (touch-tone signals). You can
operate it only during a Chara-den call.
p “Send DTMF tone” is displayed when the mode is
not DTMF Transmission Mode and “DTMF tone
OFF” is displayed in DTMF Transmission Mode.
p In DTMF Transmission Mode, you cannot
operate the action of Chara-den images.
p The DTMF tone may not be received
depending on the device of a receiving end.
V.phone settings
(Visual
preference)
See page 71.
V.phone settings
(Brightness)
You can adjust the brightness of the camera
image to be sent to other party to -3 (dark)
through +3 (bright).
 Brightness  Select a brightness level.
V.phone settings
(White balance)
You can adjust the colors of the camera
image to be sent to the other party, to make
the colors look more natural.
 White balance  Select an item.
Fine weather
. . . . . . For talking outdoors in
fine weather
Cloudy weather . . . For talking in cloudy
weather or in the shade
Automatic . . . . . . . . For adjusting white
balance automatically
Light bulb . . . . . . . . For talking under
incandescent light
V.phone settings
(Color mode set)
You can switch the color tone of the camera
image to be sent to the other party.
 Color mode set  Select a color tone.
V.phone settings
(Night mode)
You can lengthen the camera’s exposure time
to make the camera image to be sent clear in
a dark place.
 Night mode  ON or OFF
V.phone settings
(Focus)
You can set the focus for the outside camera
during a videophone call.
 Focus  Close-up or Landscape
p The focus for the inside camera is fixed to
“Portrait” (suitable mode to shoot portraits),
so you cannot change the setting.
Chara-den setup See page 69.
Backlight You can select whether to light the display
constantly or light for about 15 seconds after
an operation.
 Constant light or 15 seconds light
LCD AI See page 107.
Own number You can display your phone number.
Key guide You can display the guide of key operation
during a videophone call.
Function menu Operation/Explanation
At videophone
start-up
0
At videophone
start-up
Automatic
At videophone
start-up
Normal
At videophone
start-up
OFF
At videophone
start-up
Landscape
You can set whether to switch to Hands-free
automatically for when a videophone call starts.
1
m Settings  Videophone
 Hands-free w/ V. phone  ON or OFF
p See page 60 for the operation while Hands-free is
activated and how to switch to Hands-free.
You can set the quality of both the receiving image and
sending image on the display.
1
m Settings  Videophone
 Visual preference  Select an image quality.
p “Prefer motion spd” is effective for moving images.
When there is little motion, the quality becomes better if
you set to “Prefer img qual”.
p If you operate from the Function menu during a
videophone call, the setting is effective only for the
current videophone call.
You can set an image to be sent to the other party
instead of the camera image.
1
m Settings  Videophone  Select image
 Select an item.
On hold . . . . Sets an image for during answer-hold
(On hold).
Holding . . . . Sets an image for while a call is on hold
(Holding).
Substitute image
. . . . . . . . . . . Sets a substitute image (still image or
Chara-den) for when a camera is off.
Record message
. . . . . . . . . . . Sets an image while recording a record
message.
Preparing . . . Sets an image for while playing back an
answer message.
Movie memo
. . . . . . . . . . . Sets an image for while recording a movie
memo.
Hands-free with Videophone
Setting Videophone Hands-free
<>
Visual Preference
Setting Image Quality for
Videophone Calls
<>
Information
p If the radio wave conditions weaken during a videophone
call, the image may appear like a mosaic.
Select Image
Changing Image Displays for
Videophone Calls
<>
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ