User's Manual Part 1
86
Phonebook
<Address>
Enter a ZIP code
Enter a postal address.
p
You can enter up to 7 digits for the zip code.
p
You can enter up to 50 full-pitch/100
half-pitch characters for the postal address.
Further, you can enter pictographs as well.
p
You cannot enter “
〒
” or “-” (hyphen) in the
zip code.
<Location
information>
Select an item.
By position loc.
. . . Measures the current location and store
the location information. After checking
the location information, press
Oo
().
From loc. history
. . . Select a location information detail from
Location History and store it.
Attach from image
. . . Stores the location information from an
image. Select a folder, then the image.
p
To delete the stored location information,
select “Delete location info”.
p
When you press
i
( ) during
measuring the current location, the
confirmation display appears asking
whether to display the result obtained so far
from the location information.
p
To cancel measuring the current location,
press
r
or
l
().
p
Press
l
( ) from the confirmation
display for the location information to restart
measuring in “Quality mode”.
<Birthday>
Enter a birthday.
p
You can enter the birthday from January 1,
1800 through December 31, 2099.
<Memo>
Enter a memo.
p
You can enter up to 100 full-pitch/200
half-pitch characters. Further, you can enter
pictographs as well.
Item Operation/Explanation
<Image>
The stored still image is displayed when you
call up the Phonebook entry.
Select an item.
Select image
. . . You can store a still image in Data Box.
Shoot image
. . . You can store the shot still image.
Perform step 2 through step 3 of “Shoot a
Still Image” on page 139.
p
To release the stored still image, select
“Release image”.
p
The size of a still image you can store is
Stand-by (480 x 854) or smaller and up to
300 Kbytes in JPEG format or GIF format.
p
If you store a still image larger than 72 x 54
dots, it is displayed shrunk on the detailed
Phonebook display.
p
If you store a still image larger than 240 x
180 dots, it is displayed shrunk on the Call
Receiving display.
p
When “Disp. PH-book image” is set to “ON”,
the stored still image is displayed for an
incoming call. However, when another
image is stored in the “Picture” field, that
image is preferentially displayed for the
incoming call.
<Memory No.>
Enter a memory number.
p
Enter a three-digit number of “000” through
“999”.
p
The lowest empty memory number “010”
through “999” is entered in advance.
If “010” through “999” are all occupied, the
lowest empty memory number from “000”
through “009” is entered.
<Ring tone>
You can set a ring tone for when a voice call
or videophone call comes in from the person
stored in the Phonebook.
Select ring tone
Go to step 2 on page 98.
p
To release the stored ring tone, select
“Release ring tone”.
<Vibrator>
You can set a vibration pattern for when a
voice call or videophone call comes in from
the person stored in the Phonebook.
Select vibrator
Select a vibration pattern.
p
To release the stored vibrator, select
“Release vibrator”.
Item Operation/Explanation