User's Manual Part 1

94
Phonebook
2
Search the Phonebook
Select a Phonebook entry.
The display for search method you used last time appears.
p
The “
” mark is added to the Phonebook entry stored
in the Voice Dial List.
3
Enter a voice dial name.
p
You can enter up to 22 half-pitch katakana characters.
p
The reading (katakana only) of the Phonebook entry is
displayed as the voice dial name. Correct the name to
the easy-to-identify words.
By your voice, you can access the Phonebook entry
you set in the Voice Dial List. When “Read aloud
settings” is set to “ON” and “Voice dial” is checked,
the operation is guided by the voice guidance.
1
d
(for at least one second)
As soon as
the voice recognition start tone sounds,
vocalize the voice dial name.
Start vocalizing within seven seconds after the voice
recognition start tone sounds.
Once the voice is recognized as a voice dial entry, the
detected result is displayed.
p
You cannot change the volume of the voice recognition
start tone. The voice recognition start tone does not
sound during Manner Mode.
p
If you say the word “
ボイス検索
(Boisukensaku)”, “
使い
かたナビ
(Guide)” starts up. Go to step 2 on page 37.
p
If you say the word “
ボイス設定
(Boisusettei)”, the
display of “Voice settings” appears. (See page 95)
p
When “Auto voice dial” is set to “ON”, the display for
Auto Voice Dial appears after the voice is recognized as
a voice dial entry. Then about two seconds later, the
FOMA phone automatically dials out.
2
Highlight a detected result and press
d
or
Oo
().
The first phone number in the selected Phonebook entry
is dialed.
p
You can bring up the detailed Phonebook display by
pressing
l
( ). Highlight a phone number and
press
d
or
Oo
( ) to make a voice call. Also,
you can make a videophone call by pressing
l
( ) or a PushTalk call by pressing
p
.
Information
p
The voice dial name set by this function is effective only for
calling up a voice dial entry. For the voice guidance function,
the reading (name) stored in the Phonebook is read aloud.
p
When multiple similar voice dial names are stored or when
the voice dial name is short, the recognition rate lowers and a
wrong voice dial entry (Phonebook entry) might be accessed.
In this case, rename the existing voice dial name and store it.
p
You cannot store “
ボイスケンサク
(Boisukensaku)” and “
イスセッテイ
(Boisusettei)” as a voice dial name.
Dial from Phonebook by Voice
You need to set “Voice earphone dial” to “ON” and
open the FOMA phone in advance.
1
Press and hold the switch of the Flat-plug
Earphone/Microphone with Switch for at
least one second.
2
Perform the operations in step 1 and step 2
of “Dial from Phonebook by Voice” on
page 94.
p
You can make a call also by pressing the switch of the
Flat-plug Earphone/Microphone with Switch instead of
pressing
d
or
Oo
.
You can access a voice dial entry with the FOMA phone
closed as well. You need to set “Voice earphone dial”
to “ON” in advance, and connect with the Bluetooth
device using the Headset service or Hands-free
service.
p
For using the Hands-free service, the Bluetooth device
needs to support a voice recognition function.
1
Press the switch of the Bluetooth device.
p
Press and hold the switch of the Bluetooth device or
<
of the FOMA phone for at least one second when the
FOMA phone is closed.
2
Access a voice dial entry following the voice
guidance.
p
Once the voice is recognized as a voice dial entry, the
detected result is displayed on the Private window.
p
The FOMA phone automatically dials out about two
seconds after the voice guidance to that effect finishes.
Information
p
When you vocalize, keep your mouth away from the
microphone about 10 cm. If your voice is too distant, it may
be difficult to recognize your voice.
p
Pronounce the voice dial name as clearly as possible.
p
Before and after voice production, avoid making the sounds
unrelated to the voice dial name such as clearing your
throat, clicking your tongue, noisy breathing or other noise.
p
Vocalize in quiet, noise-free locations.
p
While vocalizing, do not put your fingers over the
microphone, or press or brush the keys.
To access a voice dial entry using the
Flat-plug Earphone/Microphone with Switch
To access a voice dial entry using a
Bluetooth device