User's Manual Part 2

148
Camera
Compose
message
You can compose i-mode mail to send to the
highlighted mail address.
Go to step 3 on page 172.
p You can compose i-mode mail also by
highlighting the mail address and pressing
Oo ().
p When you select “Compose message” from
the Scanned Code Result display, the data
on the Scanned Code Result display is
entered into the address, subject, and text
field.
Dialing You can make a voice call, videophone call,
or PushTalk call to the highlighted phone
number.
 Select a dialing type.
p When you select “Select image”, select an
image to send to the other party during the
videophone call.
p When you select “Compose SMS”, you can
compose an SMS message to send to the
phone number set as the destination
address. Go to step 3 of “Composing SMS
Messages to Send” on page 206.
p You can make a call also by highlighting the
phone number and pressing
Oo ().
 Dial
p To make an international call, select “Int’l
dial assist”. (See page 58)
p To set Caller ID Notification, select “Notify
caller ID”. (See step 2 on page 47)
Add to
phonebook
See page 87.
Add bookmark You can bookmark the site name and URL.
 YES
p Select “Page title” to edit the title.
 OK  Select a destination folder.
Save image You can save the scanned image data to set
to the Stand-by display or other displays.
 Select a destination folder.
Go to step 3 on page 159.
p See page 162 when images are stored to
the maximum.
Save melody You can save the scanned melody data to set
it as a ring tone or other tones.
 YES  Select a destination folder.
Go to step 2 on page 160.
p Select “ ” to play back the melody.
p See page 162 when melodies are stored to
the maximum.
Function menu Operation/Explanation
1
m LifeKit  Bar code reader  Saved data
The titles for stored data are
displayed from the latest one.
p Select a title to show the
Scanned Code Result display.
Save ToruCa You can save the scanned ToruCa file.
 Select a destination folder.
p Select “ ” to display the ToruCa file.
p See page 162 when ToruCa files are stored
to maximum.
Start i α ppli You can start up i- α ppli from the scanned
data.
 YES
Copy  Select a start point for copying
 Select an end point for copying.
p You can copy codes of up to 5,000 full-pitch/
10,000 half-pitch characters.
p See page 361 for pasting copied characters.
Information
<Internet>
p URL can be displayed in up to 512 half-pitch characters by
Bar Code Reader and up to 256 half-pitch characters by
Text Reader.
<Compose message>
p If the scanned data contains nonenterable characters, you
cannot enter it as a mail address, and those characters may
become spaces in the text field.
<Dialing>
p You cannot make emergency calls by scanning “110”, “119”
or “118”.
<Add bookmark>
p You can display up to 512 half-pitch characters for a URL
and can store up to 256 characters from the beginning.
<Save image>
p The file name and title for the saved image are “imageXXX”
(XXX are numerals).
<Save melody>
p The file name for the saved melody is “melodyXXX” (XXX
are numerals).
p For the melody with no title, the file name is displayed as the
title.
p When playing back the melody, it is played back at the
sound volume set for “Phone” of “Ring volume”.
Display the Saved Data List
Function menu Operation/Explanation
Bar Code Reader List