User's Manual Part 2

279
Data Display/Edit/Management
Character
stamp
You can add text.
 Enter characters.
You can enter up to 15 full-pitch/30 half-pitch
characters. However, the number of
characters you can enter decreases
depending on the size of the still image.
p Press i ( ) and select “Character color”
to select a color; then, you can change the color of
characters. You can switch between “16 Color” and
“256 Color” by pressing
c ().
Select “Font” to change the character fonts.
Select “Character size” to enlarge or shrink
characters.
Select “Character input” to edit entered characters.
 Use Mo to position the characters  and
press
Oo ()
Oo ()
p You can reselect a position by pressing
l ().
Cushy mark You can compound a cushy mark in the
“Stamp” folder. The person’s facial region is
automatically recognized and the cushy mark
is pasted to an appropriate position.
 Select a cushy mark.
p Press i ( ) and select “Scale up/Scale
down” to enlarge or shrink the cushy mark.
p To cancel, press l ().
 Use Mo to position the cushy mark  and
press
Oo ().
p The cushy mark that comes out of the still
image is cut off.
p You can add a cushy mark by pressing
l ().
Oo ()
Change size  Select an image size to change to.
p If you select the size different in proportional
ratio from the source still image, the still
image is enlarged or shrunk so that it does
not exceed the selected size with its
proportional ratio retained.
Oo ()
p You can reselect a size by pressing
l ().
Function menu Operation/Explanation
Trim away You can trim the still image to a certain size.
 Select an image size to trim to.
p You cannot select a trimming frame larger
than the still image you are editing.
p When you select “Dial/recv. PIC (480 x
288)” or “VGA (640 x 480)”, the still image
you are editing or the trimming frame are
halved at both lengthwise and sidewise to
be displayed.
 Use Mo to select a part to be trimmed
and press
Oo ()
p You can reselect a size to trim by pressing
l ().
Oo ()
p You can reselect a part to be trimmed by
pressing
l ().
Retouch You can set texture and color tone of the still
image.
 Select an item.
Sharp
. . . . . . Stresses the outline.
Blur . . . . . . . Softens the outline.
Sepia . . . . . . Makes the color tone sepia.
Emboss . . . . Makes the still image rugged.
Negative . . . Reverses the color tone.
Horizontal flip
. . . . . . . . . . . Flips the image horizontally.
Super clear shadow
. . . . . . . . . . . Makes the dark still image clear.
Memory color
. . . . . . . . . . . Corrects the color and contrast.
Oo ( )
p
You can reselect an effect by pressing
l ().
Rotate  90° to right, 90° to left or 180°
Oo ()
p You can reselect the rotation angle by
pressing
l ().
Brightness You can adjust the brightness to -3 (dark)
through +3 (bright).
 Select a brightness level.
Attach to mail Go to step 2 on page 172.
Save See page 278.
Function menu Operation/Explanation
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ