User's Manual Part 2
165
i-mode/i-motion/i-Channel
You can set the host (APN) to use for receiving services
other than i-mode (DoCoMo).
If you change this setting, you will not be able to use i-mode.
1
i
i-mode settings
Host selection
Highlight <Not recorded>
and press
l
()
Enter your Terminal Security Code.
p
If you select a stored host, the setting is changed to the
selected one.
p
To delete the stored host, press
i
( ), select
“Delete”, enter your Terminal Security Code, and then
select “YES”.
2
Do the following operations.
3
Press
l
().
1
i
Operate certificate
Certificate
Highlight a certificate and press
i
()
Do the following operations.
+m-8-1
Host Selection
Changing a Host from i-mode
(ISP Connection Communication)
※
Normally, you do not need to change this setting.
<>
Item Operation/Explanation
Host name
Enter a host name.
p
You can enter up to 9 full-pitch/18 half-pitch
characters.
Host number
Enter a host number.
p
You can enter up to 99 half-pitch
alphanumeric characters.
Host address
Enter a host address.
p
You can enter up to 30 half-pitch
alphanumeric characters.
Host address 2
Enter a host address 2.
p
You can enter up to 30 half-pitch
alphanumeric characters.
Information
p
If you set any other host than i-mode, “Pake-Houdai” or
“Pake-Houdai Full” are not applied.
SSL Certificate
Operating SSL Certificates
<>
Item Operation/Explanation
Certificate
The subject name, author, validity period, and
serial number of the certificate are displayed.
p
You can check the certificate also by pressing
Oo
()
instead of
i
().
User certificates verify that you have subscribed to the
FOMA service. Downloaded user certificates are stored
on the UIM for the use on FirstPass sites. When you
cannot display a FirstPass site because the user
certificate on the UIM has expired or the required user
certificate is not stored on the UIM, you can request the
issue and download the user certificate from the
FirstPass Center.
p
You can request and download user certificates from the
FirstPass Center.
p
This function is not available with the blue UIM.
p
The display and operating method displayed in the FirstPass
Center site are subject to change.
p
To show FirstPass sites, you can use Full Browser as well.
p
You cannot send/receive mail or receive Messages R/F while
connected to the FirstPass Center.
p
Set the date and time using “Set time” beforehand to connect
to the FirstPass Center.
p
This function is not available overseas.
Valid/Invalid
The selected item is invalidated; then “ ”
changes to “ ”.
p
When you select an invalid certificate, it will
be validated.
p
If you set a certificate to invalid, you cannot
display the sites with that SSL certificate.
p
You cannot set “DoCoMo Cert2” to “Invalid”.
■
Certificates used for SSL communication
Certificate
. . . Certificates issued by the authenticating company and
stored in the FOMA phone at purchase.
DoCoMo Certificate
. . . Certificates required for connecting to the FirstPass
Center or FirstPass sites; they are stored on the UIM
(green/white).
User Certificate
. . . Certificates downloaded from the FirstPass Center by
selecting “Client certificate” from the i-mode menu; they
are stored on the UIM (green/white).
Client Certificate
Setting FirstPass
Item Operation/Explanation
<>
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ