User's Manual Part 2
207
Mail
4
Press
l
().
The animation display during transmission appears and
mail is sent.
5
OK
Information
p
Depending on the radio wave conditions, the characters
might not be sent successfully to the destination.
p
When the number of sent mail messages exceeds the
maximum number of storage, they will be overwritten
starting from the oldest sent mail. However, protected sent
mail cannot be overwritten.
p
You cannot compose an SMS message when the number
of sent mail messages in the Outbox has reached the
maximum and those messages are all protected, or when
20 mail messages are saved to the Draft or the Draft is full.
Release the protection for sent mail messages, or send/
delete draft mail messages, and then operate again.
p
Even if “Activate” of “Caller ID notification” is set to “OFF”,
the caller ID is notified to the other party you send an SMS
message to. If you attempt to send an SMS message to the
phone number headed by “184”/“ 186”, the confirmation
display appears asking whether to delete prefix numbers
and send the mail.
p
If you set “SMS report request” to “ON”, you cannot send
SMS messages to the i-mode phone of the mova service.
p
“+” is valid only at t he beginning of the address.
p
You cannot send the message to addresses that include
any characters other than numbers, “
_
”, “#” and “+”.
p
You cannot start a new line while editing the text.
p
The special symbols (see page 414) are replaced by
half-pitch spaces.
p
Each space is counted as a character.
p
You cannot reply to the SMS message whose sender is
User unset/PublicPhone/Unavailable.
p
In B Mode of 2in1, you cannot compose SMS messages.
Function Menu of the SMS Composition Display
Function menu
Operation/Explanation
Send
You can send the SMS message.
Go to step 5 on page 207.
Preview
Before sending, you can check the address
and the text contents.
p
Press
l
( ) to send the SMS
message.
Save
You can save the SMS message you are
composing or editing to the Draft.
p
You cannot save the message when the
address field and text field are blank.
You can save up to 2,500 received SMS messages
including i-mode mail messages.
p
You can move/copy the received SMS messages to the UIM.
(See page 345)
1
When an SMS message arrives, “ (white)”
lights and the receiving message is
displayed.
When receiving ends, the display
shows the number of received
SMS messages.
p
You can display the Inbox List by
selecting “Mail”.
p
If no keys are pressed for about 15 seconds, “ ”
(see page 112) appears on the desktop and the former
display returns. (The transit time varies depending on
the setting for “Mail/Msg. ring time”.)
Press
Oo
, highlight “ ”, and press
Oo
() to
display the Inbox List.
p
See page 30 for when the FOMA phone is closed.
1
Reception Result display
Mail
Select an SMS message to be displayed.
p
Press and hold
No
for at least
one second from the detailed
SMS display to change the size
of text characters. When you set
to “Large”, the characters on the
Folder List and the Inbox/Outbox/Draft List are
displayed in large size as well.
SMS report req.
See page 208.
SMS valid. per.
See page 208.
SMS input char.
See page 208.
Receive SMS
Receiving SMS Messages
Automatically
Function menu
Operation/Explanation
<>
Reception Result display
Information
p
When the number of unread or protected messages in the
Inbox has reached the maximum, no new messages can be
received and “ (black)” is displayed. To receive SMS
messages, delete mail in the Inbox or read unread mail or
release protection until “ (black)” clears, and then perform
“Check new SMS”.
Display Newly Received SMS Messages
Information
p
Spaces will be displayed in the received SMS message
depending on the entered characters.
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ