User's Manual Part 2
208
Mail
When SMS messages arrive at the SMS Center, they are
automatically sent to your FOMA phone, but will be
held at the SMS Center if your FOMA phone cannot
receive messages such as when it is off or out of the
service area.
You can receive the messages by “Check new SMS”.
1
l
Check new SMS
2
Return
If the Center holds SMS messages, the FOMA phone
automatically receives them.
You can set whether to request an SMS report for when
sending an SMS message.
The SMS report lets you know that your SMS message was
delivered to the destination.
You can check received SMS reports in the “Inbox” folder.
1
l
SMS settings
SMS report request
ON or OFF
p
When you operate from Function menu of the SMS
Composition display, the setting is effective only for the
SMS message you are composing.
p
While the sender’s address (phone number) is highlighted in
the displayed SMS message, you can press
+Oo
() to
make a voice call, videophone call, or PushTalk call to the
displayed number (the Phone To/AV Phone To function).
Further, if the sender’s phone number is stored in the
Phonebook, the stored “name” is highlighted. In this case,
you can dial the phone number in the same way.
p
A Short Mail is received as an SMS message on the FOMA
phone. When the sender does not notify the phone number,
the reason is displayed in the sender’s field.
Check New SMS
Checking whether Center Holds
SMS Messages
Information
<>
Information
p
Some SMS messages are not delivered immediately after
checking.
p
When “ (black)” or “ (black)”, etc. are displayed, you
cannot receive any more SMS messages. Delete
unnecessary mail, read unread mail, or release protection.
(Read and unprotected messages are overwritten
automatically from the oldest one.)
p
You cannot use this function to receive i-mode mail or
Messages R/F. Use “Check new message” to receive
i-mode mail or Messages R/F.
SMS Settings
Setting SMS
SMS Report Request
<>
You can set the period that the SMS Center holds an
SMS message sent but unsuccessfully delivered due to
the out-of-service area, etc.
1
l
SMS settings
SMS
validity period
Select a holding period.
p
If you select “None”, the stored SMS message is re-sent after
a certain period of time and deleted from the SMS Center.
p
When you operated from function menu of the SMS
Composition display, the setting here is effective only
for the SMS message you are composing.
You can set the characters you can enter into the text
of SMS messages. You can set to enter only half-pitch
alphanumeric characters and half-pitch symbols.
1
l
SMS settings
SMS input character
Select an item.
Japanese (70char.)
. . . You can enter full-pitch and half-pitch characters. You
cannot enter pictographs except “ ” and “ ” (see
page 411). You can enter up to 70 characters for the text.
English (160char.)
. . .You can enter only half-pitch alphanumeric
characters and half-pitch symbols. You can enter up
to 160 characters for the text.
p
When you operate from Function menu of the SMS
Composition display, the setting here is effective only
for the SMS message you are composing.
You can set the address and “Type of number” for the
SMS Center.
This setting is for getting any service other than SMS
Service you currently use.
1
l
SMS settings
SMS center selection
User setting
Enter an address.
p
You can enter up to 20 half-pitch characters.
p
You can reset User Setting to “DoCoMo” by
Reset
Enter your Terminal Security Code
YES.
2
International or Unknown
p
If “
:
” or “#” is included in the entered address, you
cannot set it for “International”.
You can send mail messages or browse received mail
messages on the i-mode site.
p
You can use only in B Mode or Dual Mode of 2in1.
p
For details on Web mail, refer to “Mobile Phone User’s Guide
[2in1]”.
1
l
Web mail
Operate following the
instructions on the display.
SMS Validity Period
SMS Input Character
SMS Center Selection
※
Normally, you do not need to change this setting.
Web Mail
Using Web Mail
<>