User's Manual Part 2

211
i-
α
ppli
You can display software information when
downloading i-
α ppli.
1
m i- α ppli  i α ppli settings
 Disp. software info  Display or Not display
p If you attempt to re-download the software program that
was downloaded using a different UIM, the confirmation
display appears asking whether to overwrite the software
program. With the Osaifu-Keitai compatible i-
α ppli, the
confirmation display appears telling that the data on the IC
card is to be deleted. Select “YES” to start downloading.
When downloading ends, the software program that was
downloaded using a different UIM and the data on the IC
card are deleted.
p You cannot download some software programs while the IC
card function is working or IC Card Lock is activated.
p Some software programs that start immediately after
downloading cannot be saved.
p Depending on the data volume on the IC card, you might
not be able to download Osaifu-Keitai compatible i-
α ppli
even if there is still available space for software storage.
Delete the displayed software programs following the
confirmation display, and then download it again. (Some
software programs might not be targeted for deletion,
depending on the software type to be downloaded.)
Depending on the software program, you need to start it and
delete the files on the IC card before deleting the software
program itself.
p You can save up to 1 Mbyte per i- α ppli program.
p “i- α ppli mail” is the mail sent and saved by mail-linked i- α ppli
and mail received as mail-linked i-
α ppli. i- α ppli mail is
automatically saved to the i-
α ppli mail folder.
p The 3D polygonal
※
engine enables cubic images to be
displayed in i-
α ppli.
※ By combining polygons, a deep, cubic image is displayed.
Display Software Info
Information
1
i (for at least one second)
 Select a software program to be started.
: GPS compatible i- α ppli
: Osaifu-Keitai compatible i-
α ppli
: Management information i-
α ppli
: microSD memory card compatible i-
α ppli
: Vertical full display compatible i-
α ppli
: Horizontal display compatible i-
α ppli (incompatible
with full display)
: Horizontal full display compatible i-
α ppli
: i-
α ppli DX
: Mail-linked i-
α ppli
: Partially saved i-
α ppli
: Set for Auto Start
: Set for the i-
α ppli Stand-by display
: Set for both Auto Start and the i-
α ppli Stand-by
display
: Can set for the i-
α ppli Stand-by display
: Downloaded from an SSL page
: Downloaded or upgraded by using a different UIM
p You can display the Software List on the microSD
memory card by
m i- α ppli  i α ppli(microSD)
 SW list(microSD).
p Each time you press c ( ) from the Software
List in the FOMA phone, the display format changes.
p When you start an i- α ppli DX program or while it is
running, the confirmation display might appear asking
whether to permit the i-
α ppli DX program to use the
FOMA phone’s information and functions.
p When you select a partially saved i- α ppli program, you
can download the remaining part of it.
p “ ” or “ ” is displayed while i- α ppli is running.
p To end i- α ppli, press and hold r for at least one
second or press
h ; then select “YES”.
p The software program you started last time comes at
the top of the list. You cannot manually change the
order of software programs.
p See page 162 when you select “Search by i-mode”.
i- α ppli Run
Starting i- α ppli
<>
Software List