User's Manual Part 2

221
i-
α
ppli
You can make an i- α ppli program start automatically at
the set date and time. Set the date and time for
automatic start using Auto Start Time.
You can set whether to enable automatic start of i-
α ppli
programs.
1
m i- α ppli  i α ppli settings
 Auto start setting  ON or OFF
You can set the date and time for automatic start. You
can set for up to three software programs.
1
Software List/IC Card List i ()
 Auto start time
2
Put a check mark for an item to be set
l ()
Time interval set
. . . . . . Starts at an interval specified by the software
program. The setting is completed.
Start time set
. . . . . . Starts at the set start time automatically.
3
Select start time
 Enter the date and time to be set.
4
1 time  Select a type of repeat.
p If you select “1 time”, the automatic start is not repeated.
p If you select “Weekly”, put a check mark for days of the
week to be set and press
l ().
5
Press l ().
α Vibrator You can set the vibrator operation for when
an i-
α ppli program is running.
 Depend on system or Depend on software
Depend on system
. . . Does not work regardless of the setting of
“Vibrator”. With some software programs,
the vibrator works.
Depend on software
. . . Follows the setting of each software
program.
Check settings You can check each of “ i α ppli settings”.
Information
< α Backlight> < α Vibrator>
p With some software programs, the backlight and vibrator
settings are “OFF”. Consequently, if you set “Depend on
software”, the backlight and vibrator will not work; if you
want them to work, set “Depend on system”.
Starting i- α ppli Automatically
Auto Start Setting
Item Operation/Explanation
Auto Start Time
You can check whether a software program has started
automatically and properly. Also, you can check the
information of start failure from IC card. Up to three
records of automatic start, a record of automatic start
set by i-
α ppli, and a record of start failure from IC card
are stored.
1
m i- α ppli  i α ppli info  Auto start info
StartO . . . Started automatically and properly.
StartX . . . . Did not start automatically. When “ ” is
displayed, you can press Oo () to
start the software program.
Start– . . . . Has not started yet.
You can set an i- α ppli program for the Stand-by
display. Once set, the i-
α ppli Stand-by display
automatically appears each time you bring up the
Stand-by display.
1
Software List/IC Card List i ()
 Software setting  Stand-by set
 ON or OFF l ()
“ ” is displayed for the software program set as the
Stand-by display. “ ” or “ ” is displayed while an
i-
α ppli Stand-by display is running.
Auto Start Info
Information
p Software programs do not start automatically in the
following cases:
・ When the FOMA phone is turned off
・ When the date and time are not set
・ When another function is working
・ During Lock All
・ During Personal Data Lock
・ While animation/Flash movie is being played back
・ When the time set for automatic start is identical to the
reserved time set for “Software update”, or the time set for
an alarm of “Alarm”, “Schedule” or “ToDo”, “Book program”
or “Timer recording”
・ When a start time has been specified to the same software
program within 10 minutes from the previous auto-start
p If automatic start fails, “ ” appears on the desktop.
Select the icon to bring up the Auto Start Info.
i- α ppli Stand-by Display
Operating i- α ppli Stand-by Display
Software Setting (Stand-by Set)
<>
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ