User's Manual Part 1
61
Voice/Videophone Calls
You can make a call adding a country code or international call access
code to a phone number. (Except for some countries and regions, if the
phone number starts with “0”, the “0” at the beginning is automatically
deleted.)
1
Enter a phone number
or
bring up the detailed display of a Phonebook entry,
redial item, dialed call record, or received call record.
2
i()Int’l dial assistSelect a country name
Select a named or Oo()
Press l( ) to make an international videophone call.
When the beginning of the phone number is “+”, you can select only an
international call access code.
When “Japan” is selected as a country name, the display for selecting a name is
not displayed.
You can set whether to replace “+” at the beginning of a phone number
with an international call access code for when you make an international
call from Japan.
1
mSettingsNetwork setting Int’l dial assist
Auto assist settingON or OFF
Select a country nameSelect a name.
When no country code or international call access code is stored, the
confirmation display appears asking whether to store it. Select “YES” and go to
step 2 of “Country Code Setting” on page 61 for a country code, and go to step 2
of “IDD Prefix Setting” on page 61 for an international call access code.
International Dial Assist
<International Dial Assist>
Setting for International Calls
Auto Assist Setting
You can store up to 27 country codes to be added for making
international calls from overseas.
1
mSettingsNetwork settingInt’l dial assist
Country Code set.
Highlight <Not recorded> and press l().
If you select a stored country name, you can check the stored contents.
2
Enter a country name Enter a country code.
You can enter a country name of up to 8 full-pitch/16 half-pitch characters.
You can enter a country code of up to 5 digits. But you cannot use #, :, and +.
You can store up to three international call access codes to be added to
the beginning of a phone number for making an international call.
1
mSettingsNetwork settingInt’l dial assist
IDD prefix setting
Highlight <Not recorded> and press l().
If you select the stored item, you can check the stored contents.
2
Enter a nameEnter an international call access code.
You can enter a name of up to 8 full-pitch/16 half-pitch characters.
You can enter an international call access code of up to 16 digits.
Country Code Setting
IDD Prefix Setting
Function Menu while Country Code Setting/IDD Prefix
Setting is Displayed
Function menu Operation/Explanation
Edit Go to step 2 of “Country Code Setting” on page 61 for Country
Code Setting, and go to step 2 of “IDD Prefix Setting” on page 61
for IDD Prefix Setting.
You can edit the item also by pressing l().