User's Manual Part 1

70
Voice/Videophone Calls
・Even when a call comes in, the ring tone does not sound. The “Missed call” icon
appears on the display and the call is stored in “Received calls”. The guidance is
played back to the caller to the effect that you are currently driving or in an area where
mobile phones should not be used. Then the call is disconnected. When a PushTalk
call comes in, no answer is made and the message “Connection failed” appears on the
caller’s display. For the talk among three or more members, the message to the effect
that you are driving is conveyed to them.
However, when the power is off or “ ” is displayed, the caller hears the
out-of-service area guidance instead of the Public Mode guidance.
・The ring tone does not sound and the Call/Charging indicator does not flicker even
when mail or a message comes in. In addition, the set vibrator does not work.
・The ring tone for 64K data communication, alarm tone, and charging confirmation tone
do not sound, and a melody while an i-αppli program is running is not played back.
・The tickers of i-Channel are not displayed.
・See page 70 for how Public Mode (Drive Mode) and each network service work for
incoming calls when they are simultaneously activated.
Public Mode (Power Off) is an auto-answer service that puts importance
on manners in public spaces. Once you activate Public Mode (Power Off),
the guidance is played back telling that you cannot answer the call as
you are currently in a place (hospital, airplane, around priority seat in a
train, etc.) where use is prohibited. Then the call is disconnected.
1
Enter “:25251”d
Public Mode (Power Off) is set. (Nothing is changed on the Stand-by display.)
After setting Public Mode (Power Off) and turning off the power, the guidance “The
person you are calling is currently in an area where use is prohibited. Please try
again later.” is played back for incoming calls.
To release Public Mode (Power Off), dial “:25250”.
To check the setting for Public Mode (Power Off), dial “:25259”.
When Public Mode (Drive Mode) is activated
<Public Mode (Power Off)>
Using Public Mode (Power Off)
The setting stays activated until you dial “:25250” to deactivate Public Mode (Power
Off). You cannot deactivate the setting just by turning on the power.
The guidance is played back to the caller telling that you are currently in a place where
you should turn off the power. Then the call is disconnected. When a PushTalk call
comes in, no answer is made and the message “Connection failed” appears on the
caller’s display. For the talk among three or more members, the message to the effect
that you do not participate is conveyed to them.
The Public Mode (Power Off) guidance is played back even when you are out of the
service area or out of reach of radio waves.
・See page 70 for how Public Mode (Power Off) and each network service work for
incoming calls when they are simultaneously activated.
■The receiving operation during Public Mode (Drive Mode/Power Off)
When Public Mode (Power Off) is activated
Service Responses to Incoming Voice Calls
Responses to Incoming
Videophone Calls
Voice Mail
Service
※
Plays back the Public Mode guidance,
and then the call is connected to the
Voice Mail Service Center.
Does not play back the video
guidance for Public Mode, and
the call is connected to the Voice
Mail Service Center.
Call
Forwarding
Service
Plays back the Public Mode guidance,
and then the call is forwarded to the
forwarding destination.
Whether the guidance is played back
or not depends on the guidance
setting of Call Forwarding Service. If
“Plays guidance” is set, plays back the
Public Mode guidance. If “Does not
play guidance” is set, does not play
back the guidance.
Does not play back the video
guidance for Public Mode, and
the call is forwarded to the
forwarding destination.
If the destination does not support
videophone calls, the call is
disconnected.
Nuisance
Call Blocking
Service
For the call from the phone number
registered to be rejected, plays back
the Call Rejection guidance, and then
the call is disconnected.
For the call from the phone
number registered to be rejected,
plays back the video guidance for
Call Rejection, and then the call is
disconnected.