User's Manual Part 2
305
1Seg
2
Press l().
Act. TV w/ alarm Select an item.
Auto ON . . . . . . After the Booking Alarm Notification display
appears, 1Seg automatically starts.
Manual ON . . . . You can manually activate 1Seg from the
Booking Alarm Notification display.
OFF . . . . . . . . . . Only the booking alarm notification is notified.
You cannot activate 1Seg from the Booking
Alarm Notification display.
Auto power ON You can set whether to turn on the power automatically to notify
booking alarm when the booking alarm notification time arrives
during power off.
ON or OFF
1Seg volume You can set the sound volume of a 1Seg program when it is
activated by “Act. TV w/ alarm”.
Use Bo to adjust the volume.
Off timer You can set to end watching a 1Seg program for when the
specified time elapses after the 1Seg program automatically
starts by “Act. TV w/ alarm”.
Select a time.
Prefer manner
mode
You can set the booking alarm tone which sounds at the specified
time during Manner Mode.
ON or OFF
ON . . . . Sounds at the same volume as set for “Alarm for Book
program” on page 114.
OFF . . . Sounds at the volume set for this function.
Item Operation/Explanation
You can set timer recordings by setting the date/time, channel, and
program name. You can set up to 100 timer recordings.
1
m1SegTimer recording listl()
Do the following operations.
Select a set timer recording to check the contents, and you can edit it by pressing
l().
You can display the used memory space (estimate) by pressing i().
Timer Recording List
Item Operation/Explanation
Channel Select a channel.
Edit title Enter a program name.
You can enter up to 48 full-pitch/96 half-pitch characters.
Start date
setting
Enter a date/time for starting or ending recording. The booking
alarm notification is made about one minute before the starting
time.
Select an item.
Enter date . . . . . . .Enter a date/time directly.
Choose date . . . . .Select a date from the Calendar and enter a
time.
End date setting
Repeat Select a type of repeat.
If you select “1 time”, the recording is not repeated.
If you select “Select day”, put a check mark for days of the week
to be set and press l().
The timer recording set with repetition is counted as one event.
Alarm You can set whether to make the alarm tone for the booking
alarm notification.
ON or OFF
Volume Use Bo to adjust the volume.
You cannot set the volume to “Step”.