User's Manual Part 2

306
1Seg
2
Press l().
When the confirmation display appears asking whether to set the timer recording,
select “YES”. If you select “YES (confirm once)”, the same confirmation display
does not appear afterward.
Priority You can set a recording operation for when the start date/time
arrives while operating a function which cannot be started up
simultaneously.
Recording or Operation
Recording . . . . Suspends and terminates the function being
operated, and starts recording.
Operation. . . . . The confirmation display appears asking
whether to start recording. Select “YES” to
suspend and terminate the function being
operated and start recording.
For while operating a function which can be started up
simultaneously, recording starts by the Multitask function.
When the start time arrives during a call (including dialing and
ringing), recording starts after you end the call. When you are
using another function during a call, recording starts after you
end the call and the function.
Overwrite setting When you set a recording to be repeated and set “Overwrite
setting” to “ON”, the program recorded last time is automatically
deleted and overwritten.
ON or OFF
Item Operation/Explanation
Information
You can book programs or set timer recordings also by using the program information
displayed in the Program Guide i-αppli, sites, or mail. In that case, the registration
display might appear with the start date/time, end date/time, channel, and program
name entered.
When you booked multiple programs whose booking alarm notification is made at the
same date/time, the notification for the program set for the earliest start date/time is
preferentially made. When the start date/time of the programs is the same, the
notification set for the program booked in the last is preferentially made.
You cannot set multiple timer recordings whose recording time overlaps. If you set two
timer recordings and the recording end time of one program is the same as the
recording start time of the other, recording of the first program ends about one minute
earlier.
You cannot book programs or set timer recordings of which starting date/time or alarm
notification date/time (for Timer Recording, about one minute before) is over except
for the booking set to be repeated.
The program bookings and timer recordings of which alarm notification date/time is
over are automatically deleted. However, the bookings set to be repeated, program
bookings for which “Alarm” is set to “OFF” are not deleted. Also the bookings are not
deleted if you were operating the program booking/timer recording function on the
notification date/time.
When no channel lists are set, you cannot book programs and set timer recordings.
Turn off the FOMA phone after setting “Auto power ON” to “OFF” when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
When you have set “Priority” to “Operation” and the confirmation display is shown, the
recording does not start even at the recording start time and starts at the time you
select “YES”. However, the recording is not executed if the recording end time is over.
When “Overwrite setting” is set to “ON”, the timer recording starts after erasing the
program previously recorded. Regardless of whether you have watched the recorded
program or not, or whether you have succeeded or failed timer recording, the
previously recorded program is erased. If it is not erased before the timer recording
starts, recording might not start on time.
When you set “Overwrite setting” to “ON” for a recording, the file size of the recorded
video might become larger than that of the video recorded last time because the file
size varies depending on the recording (or watching) environment or programs. Note
that you might not be able to record correctly when the unused memory space in the
storage location is not enough.
The title of the recorded video file takes the program name booked for the timer
recording.
“ ” appears on the viewer display during recording by Timer Recording.
The audio from a 1Seg program is not played back during recording that has been
started by Timer Recording. You can play back the audio by pressing -r or
adjusting the sound volume, however.
Function Menu while Book Program List or Timer
Recording List is Displayed
Information
Function menu Operation/Explanation
New Go to step 1 on page 304 for Book Program.
Go to step 1 on page 305 for Timer Recording.