User's Manual Part 2
308
1Seg
When the booking alarm notification for a program booking or timer recording is set to
the same time of “Alarm”, “ToDo”, or “Schedule”
The notification is made in the priority order of “Alarm” →“Timer recording” →“ToDo”
→ “Schedule” → “Book program”. However, if you set alarm for “Auto power ON” and a
program booking to the same time, and the specified time comes while the power is
turned off, the icon does not appear on the desktop.
A missed program booking or timer recording is notified by the icon on the desktop.
When the power is turned off
The booking alarm notification is not made except for the program booking set with
“Auto power ON”. For Timer Recording, you cannot record a 1Seg program unless the
power has been set to “ON” one minute before the start date/time.
The icon does not appear on the desktop even after turning on the power.
In Manner Mode
The vibrator, message display, and illumination light notify you. The alarm sounds at
the volume set for Manner Mode. (See page 113)
During Lock All, Personal Data Lock or Omakase Lock
The booking alarm notification is not made. You cannot record a 1Seg program unless
each lock is released one minute before the start date/time.
After releasing each lock, the icon appears on the desktop to inform you.
During infrared data exchange, during iC communication, or while SD-PIM is operated
The booking alarm notification is not made. You cannot record a 1Seg program unless
each function is finished one minute before the start date/time.
After each function is finished, the icon appears on the desktop to inform you.
While updating software program
The booking alarm notification is not made. You cannot record a 1Seg program unless
software update is finished one minute before the start date/time.
When the specified time comes during updating software program, the icon does not
appear on the desktop even after updating is completed.
Information
When you book programs or timer recordings with “Alarm setting” set to “Alarm
preferred”, and the booking alarm time arrives while you are dialing, the alarm sounds
after you have called up the other party. When booking alarm time arrives during
ringing, the alarm sounds after communication has started.
The alarm tone stops by pressing any of the keys, but the animation/i-motion becomes a
still image, and the booking alarm message stays displayed. When “Act. TV w/ alarm” is
set to “OFF”, press any key again to clear. However, you cannot clear the booking alarm
message by pressing a side key, with the FOMA phone closed. When a call comes in,
the alarm stops.
Press Oo( ) and select “YES” from the Booking Alarm Notification display; then
1Seg starts, and you can watch the booked program. If you start watching the booked
program during recording, the video recorded up to that point is automatically saved;
then the booked program appears.
When you have set “PIN1 code entry set” to “ON” and set “Auto power ON” to
automatically turn on the power to make a booking alarm notification for a program
booking, the display for entering your PIN1 code appears after the power is
automatically turned on. The booking alarm notification is not made unless you enter
your PIN1 code.
When you set “Auto power ON” to automatically turn on the power to make a booking
alarm notification for a program booking, the alarm notification is made after the
wake-up image stops.
You might not be able to set some i-motion movies/Chaku-uta Full
®
music files for an
alarm for a program booking.
Depending on the i-motion movie you set for the alarm for a program booking, only
the audio might be played back at the specified time.
When a Chaku-uta Full
®
music file is set for an alarm for a program booking, only the
audio is played back at the specified time. The illumination for when you play back a
demo to select an alarm tone differs from for when you are notified by an alarm.
To clear alarm tone/booking alarm message, animation, and
i-motion for Book Program
When “Act. TV w/ alarm” of Book Program is set to “Manual
ON”
Information