User's Manual Part 2

337
Data Display/Edit/Management
Change size Select an image size to change to.
If you select the size different in proportional ratio from the
source still image, the still image is enlarged or shrunk so that it
does not exceed the selected size with its proportional ratio
retained.
Oo()
You can reselect a size by pressing l().
Trim away You can trim the still image to a certain size.
Select an image size to trim to.
You cannot select a trimming frame larger than the still image
you are editing.
When you select “Dial/recv. PIC (480 x 288)” or “VGA (480 x
640)”, the still image you are editing or the trimming frame are
halved at both lengthwise and sidewise to be displayed.
Use Mo to select a part to be trimmed and press
Oo().
You can reselect a size to trim by pressing l().
Oo()
You can reselect a part to be trimmed by pressing l().
Retouch You can set texture and color tone of the still image.
Select an item.
Sharp. . . . . . . . . . . . . . . . .Stresses the outline.
Blur . . . . . . . . . . . . . . . . . .Softens the outline.
Sepia . . . . . . . . . . . . . . . . .Makes the color tone sepia.
Emboss. . . . . . . . . . . . . . .Makes the still image rugged.
Negative . . . . . . . . . . . . . .Reverses the color tone.
Horizontal flip . . . . . . . . .Flips the image horizontally.
Super clear shadow . . . .Makes the dark still image clear.
Memory color. . . . . . . . . .Corrects the color and contrast.
Oo()
You can reselect an effect by pressing l().
Function menu Operation/Explanation
Rotate 90° to right, 90° to left or 180°Oo()
You can reselect the rotation angle by pressing l().
Brightness You can adjust the brightness to -3 (dark) through +3 (bright).
Select a brightness level.
Attach to mail See page 332
Save See page 335.
Function menu Operation/Explanation
Information
<Marker stamp>
You cannot select the marker stamp with following sizes:
・When the size is larger than the still image to be edited
・CIF (352 x 288) ・VGA (640 x 480) ・QVGA (240 x 320)
・QCIF (176 x 144) ・Sub-QCIF (128 x 96)
You cannot enlarge a marker stamp to the size larger than the still image you are
editing.
<Character stamp>
You cannot set some character colors depending on the image to be edited. In that
case, select another color.
<Cushy mark>
You cannot select a cushy mark larger than VGA (640 x 480) size.
You can enlarge or shrink a cushy mark up to three times, but cannot enlarge it to the
size larger than VGA (640 x480) size.
Person’s face or outline might not be recognized correctly. When multiple persons’
faces are found, a single person’s face only is recognized.