User's Manual Part 2
230
Mail
2
Select a record to be displayed.
The detailed display of the Address list is displayed.
With an SMS message for which the other party’s phone number is not notified,
the reason for no caller ID is displayed.
To send i-mode mail to the displayed address, press Oo( ) and go to
step 3 on page 198. To send an SMS message to the displayed phone number,
press Oo( ) and go to step 3 on page 244.
To store in the Phonebook, press m( ). Go to step 2 of “Storing Displayed
Phone Number/Mail Address in Phonebook” on page 96.
Function Menu while Sent/Received Address is Displayed
Function menu Operation/Explanation
Character size You can switch the character size for the list. (See “Dialed/recv.
calls” on page 129)
Feel＊Mail
[Received Address
only]
The Feel＊Mail image is played back. See page 122 for Feel＊
Mail.
You can play back the Feel＊mail image also by pressing
c().
Add to phonebook See page 96.
Add desktop icon See page 127.
Compose message You can compose an i-mode mail message. The mail address is
entered in the address field.
Go to step 3 on page 198.
Compose SMS You can compose an SMS message. The phone number is
entered into the address field.
Go to step 3 on page 244.
Dialing If the mail address has been stored in a Phonebook entry, you
can make a voice call, videophone call or PushTalk call to the
phone number stored in the Phonebook.
Select a dialing type.
When you select “Select image”, select an image to be sent to
the other party during a videophone call. To cancel the setting,
select “Release”.
When multiple phone numbers are stored in a Phonebook
entry, you can dial the first phone number.
Dial
To make an international call, select “Int’l dial assist”, select an
international call access code, and follow the procedure above
after selecting “Dialing” from the Function menu. (See page 61)
To set Caller ID Notification, select “Notify caller ID”. (See step 2
on page 48)
Redial/Dialed calls
[Sent Address only]
You can display the Redial list or the Dialed Call list.
Received calls
[Received Address
only]
You can display the Received Call list. All received calls (all calls)
are displayed.
Delete this YES
Delete selected Put a check mark for records to be deletedl()
YES
Delete all Enter your Terminal Security CodeYES
Function menu Operation/Explanation