User's Manual Part 2
253
i-αppli
The FOMA phone supports “motion tracking” which operates i-αppli programs (by
inclining or swinging the FOMA phone) through the recognition technology of the inside
camera.
It might not work in the following cases:
・When the lens of the inside camera is dirty
・When the clothes you are wearing are similar to the background
・When the background is not stable such as when you are moving
・When you are in a dark or too bright place
You can check the details when a software program malfunctions.
1
mi-αppli iαppli infoTrace info
When the memory space for Trace Info becomes full, the information is
overwritten from the oldest one.
You can operate “Copy info” and “Delete info” from the Function menu.
You can check the details when an i-αppli program ends because of a
security error.
1
mi-αppli iαppli infoSecurity error history
You can operate “Copy info” and “Delete info” from the Function menu.
You can display the security error history also by selecting “” on the desktop.
Motion tracking
Information
This application program is the game played by inclining or swinging the FOMA
phone. If you excessively swing your FOMA phone, it might happen that it hits against
persons or objects, resulting in accidents or damage. When playing the game,
securely take hold of your FOMA phone, do not swing to an extent more than
necessitated, and check around you for safety.
Trace Information
Security Error History
Function Menu of the Software List
Function menu Operation/Explanation
Set iαppli To You can set whether to permit the i-αppli program to start from a
link on site or mail message. You can set also for when you place
the FOMA phone over an IC card compatible scanning device.
You can set this for each software program.
Put a check mark for items to be setl()
Some items might not be set depending on the software
program.
Auto start time See page 262.
Software setting
(Stand-by set)
See page 263.
Software setting
(Network set)
You can set whether to communicate while an i-αppli program is
running.
Network setON, OFF or Check every startl()
If you select “Check every start”, the confirmation display
appears each time you start the i-αppli program.
Software setting
(Stand-by net)
See page 263.
Software setting
(Icon info)
You can set whether to permit the i-αppli program to use
information of icons indicating i-mode mail, SMS messages,
Messages R/F, battery level, Manner Mode, and within/out-of
service area.
Icon infoON or OFFl()
Software setting
(Hor. open menu
set)
You can set the i-αppli program for when it starts by selecting
“i-αppli” on the Horizontal Open Menu.
Hor. open menu setON or OFFl()
Software setting
(Change mld./img.)
You can set whether to permit the i-αppli program to change the
setting for the ring tones, Stand-by display, etc. This function is
available only for i-αppli DX programs.
Change mld./img.ON, OFF or Check every change
l()
If you select “Check every change”, the confirmation display
appears each time the i-αppli program tries to change the
setting for the ring tones, Stand-by display, etc.