User's Manual Part 2
267
Osaifu-Keitai/ToruCa
You can start the Osaifu-Keitai compatible i-αppli from the Software list.
By using Osaifu-Keitai compatible i-αppli, you can read/write the data
inside the IC card and use convenient functions such as depositing
electronic money or traffic tickets, or checking your account for the
balance and usage details on the mobile phone.
Take care of your Terminal Security Code and password used for each service not to
reveal to anyone.
When you start or download the Osaifu-Keitai compatible i-αppli program for the first
time, the message “Use IC card for current UIM?” appears. When you select “YES”,
you cannot use the IC card function afterward unless you insert the same UIM.
To use the IC card function with another UIM, delete all the information on the IC card
from “Change IC owner”, and then delete all the Osaifu-Keitai compatible i-αppli
programs other than “iD設定アプリ (iD Setting Application)”. Otherwise, you cannot
use it.
Reading and writing data from the software program and to the IC card is suspended in
the following cases:
In that case, the read or written data is discarded. The operation after the
communication ends differs depending on the service you use.
・When a call comes in while an i-αppli program is running
・When the battery goes flat
1
mOsaifu-KeitaiIC card content
The list of the Osaifu-Keitai compatible i-αppli program is displayed. When you
select the i-αppli program, it starts up.
<IC Card Content>
Starting Osaifu-Keitai Compatible i-αppli
Read and Write Data inside the IC Card
Place the FeliCa mark “ ” of the FOMA phone over the scanning
device, and you can use the FOMA phone as electronic money to pay for
shopping or to use it as a traffic ticket. This function is available without
starting the software program.
During a call or i-mode connection, you can use Osaifu-Keitai by placing the FeliCa
mark over the scanning device, however, you cannot start the Osaifu-Keitai compatible
i-αppli.
1
Place the FeliCa mark “ ” of the FOMA phone over the
scanning device to use the target service.
The Call/Charging indicator lights when you bring your FOMA phone close to a
scanning device and communication becomes ready.
Use Osaifu-Keitai
Place the FeliCa mark “ ” of the FOMA
phone over the scanning device.
Information
Mount the battery pack to use Osaifu-Keitai. Even when the power is turned off or
when the battery has gone flat, you can use Osaifu-Keitai by placing the FeliCa mark
over the scanning device, however, you cannot start the Osaifu-Keitai compatible
i-αppli. You might not be able to use Osaifu-Keitai if you have left the battery unused
for a long period or not charged it after the low battery alarm sounds. Charge the
battery.
When the FeliCa mark “ ” of the FOMA phone placed over the scanning device is
not identified, slightly move the mark forwards, backwards, to left, or to right.
Osaifu-Keitai compatible i-αppli might start when you place the FOMA phone over the
scanning device.