User's Manual Part 2

290
GPS Function
Example: When the current date and time are 12:00/18/Nov and you set 10:00 as the
start time and 10:00 as the end time
Repeat Validity period Period of location provision
1 time — 12:00/18/Nov through 10:00/19/Nov
Daily Start date: 20/Nov
End date: 30/Nov
10:00/20/Nov through 10:00/1/Dec
Start date: 10/Nov
End date: 30/Nov
12:00/18/Nov through 10:00/1/Dec
OFF 12:00/18/Nov through 10:00/19/Nov, every day
10:00 through 10:00 of the next day on and after
19/Nov
Select day Start date: 20/Nov
End date: 30/Nov
10:00 through 10:00 of the next days of the specified
days of the week from 20/Nov through 30/Nov
Start date: 10/Nov
End date: 30/Nov
If 18/Nov is the specified day;
12:00/18/Nov through 10:00/19/Nov, 10:00 through
10:00 of the next days of the specified days of the
week from 19/Nov through 30/Nov
OFF If 18/Nov is the specified day;
12:00/18/Nov through 10:00/19/Nov, 10:00 through
10:00 of the next day of the specified days of the
week on and after 19/Nov
You can use this setting for changing the host for Service Settings.
1
mLifeKitGPSGPS settingsHost selection
Highlight <Not stored> and press l().
If you select a stored host, the setting is changed to that host.
To delete a stored host, press i( ), select “Delete” and select “YES”.
2
Do the following operations.
3
Press l().
Host Selection
※Normally, you do not need to change this setting.
Item Operation/Explanation
Host name Enter a host name.
You can enter up to 9 full-pitch/18 half-pitch characters.
Host number Enter a host number.
You can enter up to 99 half-pitch alphanumeric characters.
Host address Enter a URL.
You can enter up to 100 half-pitch alphanumeric characters.