User's Manual Part 2

297
1Seg
※1 In Data Broadcasting Mode, you cannot operate.
※2 You cannot operate in Horizontal Open Style.
※ 3 When you close the FOMA phone, the vertical display returns. In Horizontal Open Style,
the horizontal display automatically appears; the vertical display does not appear.
Start program
guide i-αppli
l()
※2
Program info l(for at least one second)
※2
Program info
(outline)
m()
Switch display m( ) while displaying program information (outline)
Each time of pressing from the horizontal display switches the
setting of “Icon” and “Caption posit. in w-scr”.
Full display d
※2※3
 In Video Mode, each time of pressing switches the display directions.
In Data Broadcasting Mode, each time of pressing switches
between the normal display and the full display.
Record video Oo()
※1
or p(for at least one second)
Oo()
※1
or p to end
Record still image p
Switch TV/data BC c()
※2
Each time of pressing switches between Video Mode and Data
Broadcasting Mode.
Operation Key operation
Information
Even when you switch the display by using Multitask while you are watching a 1Seg
program, the audio from the 1Seg program is played back. (Play Background) The
audio might not be played back, however, depending on the function or program.
(See page 511)
When “TV sound while closed” is set to “ON”, the audio is played back even if you
close the FOMA phone while you are watching a 1Seg program. You cannot do
anything other than adjusting the volume when your FOMA phone is closed.
The following might occur depending on the airwave conditions:
・The audio is interrupted.
・The data broadcasting is not operable.
・Block-shaped noise appears on the display or playing stops.
・The video or the data broadcasting is not displayed. (A dark screen appears.)
The caption might not be displayed depending on the program.
The data broadcasting cannot be displayed on the horizontal display.
If you move, the receivable airwaves or broadcasting stations might change being
affected by mountains or buildings. If reception on 1Seg goes bad after moving,
perform “Auto channel setting”; then reception might be improved via different
airwaves or you might be able to watch programs of other broadcasting stations.
If you use Channel Search to select channels after you move, etc., you might find the
channels you could not store by “Auto channel setting”. Execute “Add to ch. list” to
store the channels you found, and then you can watch the channel from the next time.
When starting 1Seg or switching channels, it takes a while before you can watch a
1Seg program.
Function Menu of Viewer Display
Information
Function menu Operation/Explanation
Channel info You can display the detailed display of the selected channel list.
Select a broadcasting station to switch to it.
Program info
You can display information of the program you are watching.
When you have not obtained program information, it is not
displayed.
Channel list Go to step 1 of “Select Channel List” on page 294.
Channel setting See page 294.
Add to ch. list You can add the broadcasting station you are currently watching
to the channel list.
YES
The broadcasting station is stored in the lowest number of an
unoccupied remote-control number from 13 onward.
Program guide See page 300.