User's Manual Part 3

517
Appendix/External Devices/Troubleshooting
Cannot use network transmission
…“Network set” is set to “OFF”. Set it to “ON” and try
again. (See page 253)
Certificate is rejected
Certificate is rejected (tampered)
…You received an altered SSL/TLS certificate, so could
not connect.
Check new message is set all OFF
…No check marks are placed to the items for “Set check
new message”. Put a check mark for the items to be
checked and try again. (See page 234)
Check SMS center selection
…The SMS Center is not correctly specified by SMS
Center Selection. Specify the SMS Center and try
again. (See page 247)
Conditional access
Cannot watch
…Receiving by limited method, so you cannot watch.
Connection failed
…Failed to connect to the Bluetooth device while
switching the voice to it during the call.
…Radio waves are weak, so you cannot connect. Move
to a place where radio waves are strong enough and
try again.
…The destination address set by Host Selection is
wrong, so you cannot connect to it. Check the setting
and try again. (See page 189)
…You could not connect because of network trouble.
Wait a while and try again.
Connection failed (403)
…You cannot connect to a site or Internet web page.
Connection failed (503)
Connection failed (562)
…You could not connect because of network trouble.
Wait a while and try again.
Connection failed
Check the other side device
…The Bluetooth device is not compatible with the service
supported by the FOMA phone, so could not be
registered.
…The service you tried to connect to is invalid for the
other end’s Bluetooth device, so you could not connect
to it.
Connection interrupted
…Disconnected from the personal computer during data
communication.
Connection is not valid
…The destination address set by Host Selection is not
compatible, so you cannot operate. Check the setting
and try again. (See page 189)
…The user certificate is being operated, so you cannot
connect. Complete operating
the user certificate and try again.
Could not add
…An error occurred, so you could not store.
Could not be found
…No response from the Bluetooth device, so you could
not store or connect it.
Could not find your blinks
…Failed to detect your blinks. Change the direction of
your face or the place, and then try again.
(See page 140)
D
Data in IC card is full
Unable to download
Delete service?
…This is displayed when the memory space within the IC
card is short for downloading the i-αppli program that
supports Osaifu-Keitai.
Select “YES” to display the service names of Osaifu-
Keitai already registered and the space within the IC
card (in bytes). Check the area size for shortage, select
the service to delete, start up the i-αppli program, and
then delete it.
Data is full
…The maximum number of anniversaries is stored.
Delete unnecessary ones and try again.
(See page 413, page 414)
…The maximum number of holidays/anniversaries is
stored. Delete unnecessary ones and try again. (See
page 413, page 414)
…The maximum number of holidays is stored. Delete
unnecessary ones and try again.
(See page 413, page 414)
…The maximum number of Phonebook entries has been
stored in the FOMA phone, so you could not receive a
new one. Delete unnecessary Phonebook entries and
try again. (See page 100)
…The maximum number of schedule events has been
stored in the FOMA phone, so you could not receive a
new one. Delete unnecessary schedule events and try
again. (See page 413, page 414)
…The maximum number of ToDo items has been stored
in the FOMA phone, so you could not receive a new
one. Delete unnecessary ToDo items and try again.
(See page 416)
Data is too long
A part is deleted
…Characters for one (or plural) of address, subject, and
text of the mail exceeded the maximum, so part of
them was deleted.
Data not applicable
…Received data has an error, so cannot be displayed or
saved. The received data is discarded.
Data size is too big to save
…The file exceeded the maximum storable size by
setting “File restriction”, so could not be set.
Details cannot be saved
…The ToruCa detailed data was not supported, so was
not saved.
Error Message (C - D)