User's Manual Part 3
412
Convenient Functions
You can store up to 100 each of holidays and anniversaries. However,
you cannot store multiple holidays for the same date.
1
mStationerySchedulel()
Holiday or AnniversaryDo the following operations.
2
Press l().
The holiday ( ) or anniversary ( ) you set is stored.
: Repeats yearly.
Information
If you enter a date on or after 29th in “Date (from)” and set “Repeat” to “Monthly”, the
schedule event is set on the last day of the month when the month does not have the
specified date.
If you enter February 29 of the leap year in “Date (from)” and set “Repeat” to “Yearly”,
the schedule event is set on February 28 when the year is not the leap year.
For the schedule event stored as secret data, an animation for secret data appears
when the alarm sounds in ordinary mode (not in “Secret mode” or “Secret data only”).
An alarm message is not displayed.
During standby, the alarm tone sounds at the level set for “Phone” of “Ring volume”.
During a call, the alarm tone sounds at the level set for “Volume” (earpiece volume).
Store Holidays/Anniversaries
Item Operation/Explanation
Date setting Enter the date.
Repeat Select a type of repeat.
If you select “1 time”, the holiday/anniversary is not repeated.
The holiday or anniversary set with repetition is counted as one
event.
Contents Enter the contents of the holiday or anniversary.
You can enter up to 10 full-pitch/20 half-pitch characters.
You can check the details of schedule events, holidays, or anniversaries.
1
mStationerySchedule
The Calendar display appears.
Today and the selected date
are highlighted and the number
of stored schedule events and
the contents of the day are
displayed at the bottom of the
display.
Display on the calendar
(blue): Schedule set for a.m.
(orange): Schedule set for
p.m.
＿: Schedule continues two
days or more
Holidays are displayed in red,
and anniversaries are marked
with a red circle.
If you press m() or c( ) from the monthly display, the calendar
for the pervious or next month is displayed.
If you press m() or c( ) from the weekly display, the calendar for
the pervious or next week is displayed.
2
Select a date.
The Schedule list for the selected date is displayed.
Check Schedule Events
Calendar display
(Monthly display)
Calendar display
(Weekly display)
Schedule list