User's Manual Part 3

531
Appendix/External Devices/Troubleshooting
If you select “Only notification” of “Set auto-update”, “Update
notification icon” notifies you when software update is necessary.
You can start Software Update by selecting “Update notification icon”, or
from the Menu display.
1
Select “Update notification icon” on the Stand-by
display.
If you select “No”, the confirmation display appears asking whether to delete the
notification icon.
“Update notification icon” appears in the following cases:
・When notification is provided by DoCoMo
・When “Update is needed” is displayed in step 3 on page 531
・When you fail to update software programs during updating in Reserve Update
・When you cancel the reservation for the software update
2
Check whether the software programs need to be
updated.
You can answer voice calls
during check.
Start Software Update
Start Software Update by Selecting “Update notification icon”
3
When updating is not necessary, “No update is needed”
is displayed. Use the FOMA phone as it is. When
updating is necessary, “Update is needed” is displayed.
You can select either “Now update” or “Reserve”.
1
mSettingsOther settingsSoftware update
Enter your TerminalSecurity CodeUpdate
2
Go to step 2 of [Start Software Update by Selecting
“Update notification icon”] on page 531.
Software Update
display
※When updating is
not necessary
※The display for when
the software update is
unavailable because of
the server congestion.
(Wait for a while and
then start the software
update again.)
Start Software Update from Menu