User's Manual Part 3

430
Convenient Functions
2
Make/Receive a call via the Bluetooth device.
“ ” is displayed during a call via the Bluetooth device.
For operations from a Bluetooth device, refer to the instruction manual for the
Bluetooth device.
Press and hold h for at least one second during a call.
During a call with the FOMA phone while connecting using Headset service, you can
switch only from the Bluetooth device.
For operations from the Bluetooth device, refer to the instruction manual for the
Bluetooth device you use.
You cannot talk over a Bluetooth device while USB Hands-free compatible device or
Flat-plug Earphone/Microphone with Switch (option) or Flat-plug AV Output Cable
(option) is connected even if you switch to the Bluetooth device.
You cannot switch to a Bluetooth device while Remote Monitoring is activated.
Selecting whether to talk over the FOMA phone or a Bluetooth
device
Information
When a call comes in while the Bluetooth device is connected using Headset service
or Hands-free service, the ring tone sounds from the Bluetooth device even if Manner
Mode is activated or “Ring volume” is set to “Silent” on the FOMA phone.
During a call on the Bluetooth device, you cannot adjust the sound volume of the
Bluetooth device by adjusting that on your FOMA phone.
During a call on the Bluetooth device, the call state does not change by closing the
FOMA phone regardless of the setting of “Setting when closed”.
When the Bluetooth communication is disconnected during a call on the Bluetooth
device, the call state follows the setting of “Disconnection settings”. However, when it
is disconnected while the FOMA phone is closed and “Disconnection settings” is set
to “Continue on the phone”, the call shifts to the state as specified by “Setting when
closed”. When “Setting when closed” is set to “End the call”, the call shifts to “No tone”
state.
When you connect your FOMA phone to a Bluetooth device using Audio
service, you can output the audio of 1Seg programs from the Bluetooth
device.
1
Connect a Bluetooth device using Audio service.
See page 428 for connecting to a Bluetooth device.
2
Watch a 1Seg program.
The sound is output from the Bluetooth device.
When the confirmation display appears asking whether to start the output to the
Bluetooth device, select “YES”.
Once you connect the FOMA phone to the Bluetooth device using Audio service,
a connection history is stored. When the connection history is found, the FOMA
phone tries to connect to the Bluetooth device automatically for watching a 1Seg
program even if it is not connected using Audio service. When the connection is
successfully completed, the audio is output from the Bluetooth device. When the
connection fails, the confirmation display appears asking whether to output audio
from the FOMA phone.
The connection history is overwritten each time the Bluetooth device is connected
using Audio service.
For operations from a Bluetooth device, refer to the instruction manual for the
Bluetooth device.
Play Back Audio of 1Seg Programs Using Bluetooth
Device
Information
You can play back the audio of 1Seg programs only on an A2DP compatible
Bluetooth device that supports copyrighting by the SCMS-T. Open first the 1Seg
viewer display, and then operate Wireless Earphone Set P01. If you have been
operating Wireless Earphone Set P01 before you open the display, the audio might
not be played back.
While you are playing back the audio from a 1Seg program via a Bluetooth device,
you cannot adjust the sound volume of the Bluetooth device by adjusting that on your
FOMA phone.
You cannot play back the audio from the Bluetooth device when the Flat-plug Stereo/
Earphone Set (option) or Flat-plug Earphone/Microphone with Switch (option) is
connected.