User's Manual Part 3
455
Network Services
You can set “Voice mail” or “Call forwarding” to be operated from touch-
tone landline phones, public phones, DoCoMo mobile phones, or others.
To use “Voice mail” or “Call forwarding” overseas, you need to set “Remote control” to
“Activate” in advance.
1
mServiceRemote control
Do the following operations.
You can add and use the additional number 1 and 2 at maximum as the
phone numbers of your FOMA phone besides the basic number.
When you remove or replace the UIM, the multi number settings (name, phone
number, etc.) stored in the FOMA phone might be erased. In this case, store them
again.
The name that corresponds to each multi number (Basic Number/Additional Number1/
Additional Number2) appears on the dialing display/Call Receiving display.
When you make a call from Redial, Dialed Calls, or Received Calls, the multi number of
the call you dialed/received at that time appears and is dialed.
<Remote Control>
Setting Remote Control
Item Operation/Explanation
Activate YES
Deactivate YES
Check setting You can check the setting contents of Remote Control.
Information
You can set and confirm this setting from the FOMA phone with your own UIM
inserted. You cannot remote-control the setting from landline phones, public phones,
and other mobile phones.
<Multi Number>
Setting Additional Number
You can edit the registration name for the basic number, register
additional numbers, and edit the registration names for them.
1
mServiceMulti numberNumber setting
Select a phone number.
You can register/edit also by pressing i( ) and selecting “Edit” or by
pressing l().
Select the basic number or registered additional number to check the registration
name and phone number.
To reset the registration name of the basic number, press i( ) and select
“Reset BasicNo. name”, then select “YES”.
To delete the registered additional number, press i( ) and select “Delete
this” or “Delete all”, then select “YES”.
2
Enter a registration nameEnter a phone number.
You can enter up to 8 full-pitch/16 half-pitch characters for a registration name.
You cannot edit the phone number of the basic number.
By switching this setting, you can make all calls from a specified phone
number.
1
mServiceMulti numberSet multi number
Select a phone number.
Basic Number. . . . . . . . . . . Dials by the contracted phone number.
Additional Number1/2 . . . . Dials by an additional number.
When the registration name is changed, each registration name is displayed.
However, the registration name is not displayed during Personal Data Lock.
2
YES
Number Setting
Set Multi Number