User's Manual Part 3

488
Appendix/External Devices/Troubleshooting
Settings
Lock/Security
Keypad dial lock Released 140
Reject unknown
Accept 145
Call setting w/o ID (
m10) All Accept
Select ring tone: All Same as ring tone
144
Change security code (m29) 0000 133
UIM setting —133
Scanning function Set scan: All Valid 534
Lock setting Timer lock ON at close: All OFF 137
PIM/IC security mode: Security code 137
IC lock(power-off): Setting before OFF 275
Face reader setting: Not stored 138
Face reader security: Normal
Change security code: 0000
Call time/cost Call data (m61) Last call duration/Total calls duration: 0 seconds Last call cost: ¥
Calls reset/Cost reset: --/-- --:--
419
Reset total cost&dura. ( m 60) —420
Notice call cost OFF
Max cost: ¥0 (when “Notice call cost” is set to “ON”)
Method to alert: Icon (when “Notice call cost” is set to “ON”)
Auto reset setting: OFF (when “Notice call cost” is set to “ON”)
420
CLR max cost icon —420
Clock Set time (
m31) Auto time adjust ON 46
World time watch OFF 47
Summer time OFF 47
Auto power ON/OFF All OFF 408
Alarm setting Alarm preferred 416
Incoming call Vibrator (m54) All OFF 110
Manner mode set (
m20) Manner mode 113
when “Original” is set
Record msg.: OFF Vibrator: ON Phone vol.: Silent
Mail vol.: Silent Alarm vol.: Silent VM tone: ON
Keypad sound: OFF Mic sensitiv.: Up LVA tone: OFF
Answer setting (m58) Any key answer 66
Setting when opened All Keep ringing 66
Record display set
All ON 141
Disp. PH-book image ON 117
Main menu item Sub-menu item Lower sub-menu item Setting at purchase Reference