User's Manual Part 1

Before Using the Handset

The P-01A comes with two styles.

■Normal Style

You can open the FOMA terminal easily by one-push key operation.

(One-push Open)

You can open it also manually without using the button.

You need to close the FOMA terminal manually. If it does not close, open it fully and

then close it.

■Horizontal Open Style

Hold down the part A and open the display part with the horizontal open

lever slid into the direction B. From the horizontal display, you can use

1Seg, Full Browser, and others.

If the latch is not in a state of C when you open the display, re-open the FOMA terminal

after closing it once.

Styles

One-push open button

Horizontal open lever

Information

When you open the FOMA terminal by pressing the one-push open button, it might

not open fully depending on its direction.

You can set which operation starts for when you switch to Horizontal

Open Style from the Stand-by display.

mSet./ServiceOther settingsWork with style

Select an item.

Horizontal open menu . . .Shows Horizontal Open Menu. (See page 36)

1Seg . . . . . . . . . . . . . . . . . .Activates 1Seg. (See page 255)

Camera . . . . . . . . . . . . . . . .Activates the camera in Photo Mode. (See page 239)

OFF . . . . . . . . . . . . . . . . . . .Shows the Stand-by display (wide). (See page 113)

When you open the FOMA terminal by pressing the one-push open button, be careful

not to drop it by its rebound.

When you press the one-push open button in Horizontal Open Style, the FOMA

terminal will open in Normal Style after it is closed.

Before switching the styles, be sure to completely close the FOMA terminal. If you

operate the horizontal open lever in Normal Style or with the display part unlatched,

malfunction or damage may result.

When the confirmation display to select “YES/NO” is shown and you switch the style,

the confirmation display may be cleared.

Work with Style

Information

When you switch styles from Main Menu or Horizontal Open Menu, the Stand-by

display appears regardless of the setting of this function.