User's Manual Part 1

47
Before Using the Handset
2
Enter year, month, date and time.
Use Mo to move the cursor and enter numbers by the
numeric keys.
To enter one-digit numeral for the date and time, enter
two digits beginning with “0” as in “01” through “09”.
Highlight “Time zone” and press l( ) to set the
time zone. Use Mo to select a region and press Oo().
The time displayed on the FOMA terminal is corrected according to the clock information
obtained from the network when the power is turned on.
The time is corrected when you show the Stand-by display with “Auto time adjust ON”
set.
If the time is not corrected for a while even after turning on the power, turn off and on the
FOMA terminal.
 Some few second errors might occur. You might not be able to correct the time depending
on the radio wave conditions, or the i- α ppli program set for the i- α ppli Stand-by display.
When you receive the clock information overseas and the time difference correction
information differs from the previously received one, “Time is adjusted” is displayed and
the time difference is corrected automatically. Press “OK” to update the time and show
Redial, Dialed Calls, Received Calls, sent/received mail messages and others in local
time.
Depending on the networks overseas, the time difference might not be corrected.
About date/time correction function
Information
Unless Set Time is set, the functions which use the clock such as Schedule do not
work correctly. Further, the date/time for redial items and received call records are not
stored.
The set time is retained even when the battery pack is replaced, however, it might be
reset if the battery pack is left removed for a long time. In that case, charge the FOMA
terminal and then perform the clock setting.
When “Time zone” is set to other than “GMT +9” or the time difference is corrected
overseas, the sub clock (Japanese date/time, etc.) is displayed on the Stand-by
display.
This function supports clock settings from 00:00 on January 1, 2008 through 23:59 on
December 31, 2037.
You can display the time of the specified area on the Stand-by display.
1
mSet./ServiceClockWorld time watch
ON or OFF
Use Mo to select an area and press Oo().
You can advance the time displayed for the overseas country you stay
and for a region of World Time Watch by one hour.
1
mSet./ServiceClockSummer timeON or OFF
<World Time Watch>
Displaying World Time
Information
World Time Watch does not appear when “Display setting” → “Clock” → “Stand-by
clock/Stand-by clock Wide” → “Position” is set to “OFF”, or when you use the FOMA
terminal overseas.
Summer Time