User's Manual Part 1
48
Before Using the Handset
You can set the FOMA terminal to send your phone number to the called
party’s phone when dialing. Your phone number is important
information, so take utmost care when notifying your phone number.
This function is available only when the other party’s phone supports
Caller ID.
You can set whether to notify your caller ID on the network.
1
mSet./ServiceNW servicesCaller ID notification
Do the following operations.
<Caller ID Notification>
Notifying the Other Party of Your Phone
Number
+m-1-7
Set Caller ID Notification to Network
Activate ON or OFF
Check setting You can check the setting contents of “Activate”.
Your phone number (own number) is stored on the UIM.
1
mPhonebookOwn number
You can press No to switch the tabs.
See page 414 for storing/displaying personal data.
+m-0
<Own Number>
Checking Your Own Phone Number
Own Number display
Phone number tab
List tab
Information
In Dual Mode of 2in1, you can switch between Number A and Number B by pressing
+Oo( ) from the Own Number display. “ ” appears for Number A, and “ ”
appears for Number B.
When you replace a UIM with another one (2in1 contractor → 2in1 contractor) while
using 2in1, perform “2in1 function OFF” (see page 451) and then set “2in1 setting” to
“YES”, or perform “Auto acquire No. B” (see page 415), to acquire the correct Number
B.
When you replace a UIM with another one (
2in1 contractor
→
2in1 non-contractor
),
perform “2in1 function OFF” as well to update the owner’s information to the correct
one.