User's Manual Part 1

63
Voice/Videophone Calls/PushTalk
The volume of the other party’s voice is turned up according to the
surrounding noise during a call. This setting is effective only when the
other party's voice is output from the earpiece.
1
mSet./ServiceTalkShikkari TalkON or OFF
The noise sent to the other party is reduced according to the surrounding
noise during a call.
1
mSet./ServiceTalkNoise reductionON or OFF
1
During a voice callm()
When Yuttari Talk is activated, “ ” is displayed.
Press m( ) again to return to the normal speed.
Information
 The reconnectable time differs depending on the usage status and radio wave conditions.
An estimate is about 10 seconds and the call charge is applied also for that duration.
While you are disconnected, no sound is transmitted to the other party.
<Shikkari Talk>
Reducing Surrounding Noise to Make
Voice Clear
+m-7-6
<Noise Reduction>
Reducing Surrounding Noise to Make
Voice Clear
<Yuttari Talk>
Slowing Down the Other Party’s Speaking
Speed
Information
Yuttari Talk is effective only during a current voice call. The speaking speed returns to
normal one when you end the call, switch calling parties during Multi calling, or switch
from the voice call to a videophone call.
When you switch to Hands-free, sound such as the other party’s voice is
audible over the speaker.
1
During a call, dialing, or connectingd
When Hands-free is activated, “ ” is displayed.
Press d again to deactivate Hands-free.
The sound volume during a Hands-free call follows the setting specified by
“Volume” (earpiece volume).
You can switch to Hands-free even during Manner Mode. Also, you will still hear
voice through the speaker even when you activate Manner Mode during a
Hands-free call.
You can make or receive voice calls from a Hands-free compatible device
such as In-Car Hands-Free Kit 01 (option) or a car navigation system by
connecting with your FOMA terminal.
You can connect your FOMA terminal to a Hands-free compatible device
using two ways of connections as follows:
Connect using a cable (USB connection):
To use/charge via the In-Car Hands-Free Kit 01 (option), you need to have the FOMA
In-Car Hands-Free Cable 01 (option).
Connect using Bluetooth (wireless):
To connect to a Bluetooth communication compatible Hands-free device, you need to
register and connect it to the FOMA terminal.
※For how to operate Hands-free compatible devices, refer to the respective instruction
manuals.
<Hands-free>
Switching to Hands-free
Information
While the Flat-plug Earphone/Microphone with Switch (option) is connected, you
cannot hear voice through the speaker even if you switch to Hands-free.
Keep the FOMA terminal well away from your ear during a Hands-free call. Otherwise
you could affect or damage your hearing.
Talk into the FOMA terminal within a distance of about 50 cm.
<In-Car Hands-free>
Using Hands-free Compatible Devices