User's Manual Part 1

64
Voice/Videophone Calls/PushTalk
1
When you receive a call, the ring tone
sounds and the Call/Charging indicator
flickers.
To vibrate the FOMA terminal for incoming calls, set
“Phone” or “Videophone” of “Vibrator” to other than
“OFF”.
During ringing a videophone call, “Incoming V.phone” is
displayed. However, during ringing a voice call, nothing
is displayed in particular.
“ ” is displayed at the upper left of the phone
number for incoming international calls.
Information
To connect using a cable (USB connection), set “USB mode setting” to
“Communication mode”.
“ ” appears while you are talking or communicating using a USB Hands-free
compatible device.
“ ” might appear while the FOMA terminal is connected to a USB Hands-free
compatible device, and “ ” while “USB mode setting” is set to “microSD mode”,
depending on the Hands-free device connected.
The display or ring tone for incoming calls follows the settings of the FOMA terminal.
When the sound is set to output from a Hands-free compatible device, the ring tone
sounds from that device even when Manner Mode is activated or “Ring volume” of the
FOMA terminal is set to “Silent”.
The receiving operation in Public Mode (Drive Mode) following the setting of “Public
(Drive) mode”.
The receiving operation while Record Message is activated follows the setting of
“Record message setting”.
When the sound is set to output from the FOMA terminal, the operation for when the
FOMA terminal is closed during a call follows the setting of “Setting when closed”.
When the sound is set to output from a Hands-free device, the communication state
does not change regardless of “Setting when closed” even if you close the FOMA
terminal.
Receiving a Call/Videophone Call
Chaku-moji message
(See page 56)
2
Press d or Oo( ) to answer
the call.
Press d
or Oo () to answer
the videophone call.
You can send the image through your camera to the
other party. When you press m( ) to answer the
videophone call, the substitute image is sent to the other
party. (Substitute image answering)
Press m during a videophone call to switch between
the image through your camera and substitute image
for sending to the other party.
3
Press h to end the call after talking.
For Answering a Voice Call
For Answering a Videophone Call
Information
If you close the FOMA terminal during a call, the FOMA terminal works in accordance
with the setting of “Setting when closed”. (See page 67)