User's Manual Part 1

65
Voice/Videophone Calls/PushTalk
You might hear beeps (in-call ring tone) during a call.
If you have signed up for any of Voice Mail Service, Call Waiting Service, or Call
Forwarding Service and set “Arrival call act” to “Answer”, the beeps (in-call ring tone)
will sound for another incoming call, enabling you to do the following operations:
Voice Mail Service
. . . . Transfer the call to the Voice Mail Service Center. (See page 442)
Call Waiting Service
. . . . Put your current call on hold and answer the incoming call. (See page 442)
Call Forwarding Service
. . . . Transfer the call to the registered forwarding destination. (See page 445)
You can set “Reject unknown” not to accept calls from the phone numbers that are not
stored in the Phonebook.
You cannot answer a call in Horizontal Open Style. However, when the Flat-plug
Earphone/Microphone with Switch (option) is connected, you can answer a call in
Horizontal Open Style.
<For Voice Calls>
When “Answer setting” is set to “Any key answer”, the call is placed on hold if you
answer the call by pressing .< with the FOMA terminal closed. If you have set
“Setting when closed” to “No tone” or “End the call”, the other party hears nothing, and
if you have set “Setting when closed” to “Hold”, the call hold tone is played back. You
can start talking by opening the FOMA terminal.
<For Videophone Calls>
Just after purchase, Hands-free is automatically activated during a videophone call as
“Hands-free w/ V. phone” has been set to “ON”. (See page 76) However, Hands-free
is deactivated during Manner Mode regardless of “Hands-free w/ V. phone”.
Even if Call Forwarding Service is set to “Activate”, the call is not forwarded unless the
forwarding destination is a phone compatible with the videophone conforming to
3G-324M (see page 50). Check the phone you are forwarding the call to and then
activate the service. The videophone caller does not hear the guidance to the effect
that the call is forwarded. (The message to the effect that the call is to be forwarded
appears, depending on the receiver’s FOMA terminal.)
If a videophone call comes in from the phone number to be rejected by Nuisance Call
Blocking Service, the video guidance for Call Rejection is played back and the call is
disconnected.
You can send a Chara-den image to the other party instead of the image through your
camera. (See page 73)
Information
When a caller’s phone number is provided
If you store the caller’s name, phone number, and image in the Phonebook, the name,
phone number, and icon (or image) are displayed.
If the same phone number is stored with multiple names in the Phonebook, the name
that comes first in the search order (see page 96) is displayed.
The phone number but not the name is displayed during Personal Data Lock.
For a forwarded call, the forwarder’s phone number is displayed below the caller. (It
might not be displayed in the case of some forwarders.)
When you receive a call to an additional number of Multi Number, the stored name for
the additional number is displayed below the caller. (With a forwarded call, you can
press c( ) to switch to display of the forwarder.)
When a caller’s phone number is not provided
The reason for no caller ID is displayed. (See page 139)
When you have set “Notify switchable mode” to “Indication ON”, a caller
(the other party) can switch between a voice call and a videophone call.
You (receiving end) cannot switch between a voice call and a videophone call.
Display for incoming calls
Function Menu while a Call is Ringing
Call rejection You can disconnect the call without answering.
Call forwarding See page 445.
Voice mail See page 442.
Switched between a Call and a
Videophone Call by the Other Party