User's Manual Part 1

69
Voice/Videophone Calls/PushTalk
2
Press d or Oo( ) to release hold and answer
the call.
If a videophone call is on hold, the image through your camera is sent to the other
party by pressing d or Oo( ) to release hold. If you press m()
to release hold, the substitute image is sent.
If you have set “Setting when closed” to “Hold” and put the call on hold by closing
the FOMA terminal, open the FOMA terminal or connect the Flat-plug Earphone/
Microphone with Switch (option) to answer the call.
If you connect the Flat-plug Earphone/Microphone with Switch to answer the
videophone call, the substitute image is sent to the other party.
You can set the guidance the other party hears during on hold.
1
mSet./ServiceTalkSet hold tone
On hold tone or Holding toneSelect a hold tone.
Tone 1/2 . . .The caller hears the pre-installed guidance in Japanese.
RHAPSODY ON A THEME OF PAGANINI OP 43
. . . . . . . . . . .The caller hears the melody. You can set this for “Holding tone” only.
Voice announce
. . . . . . . . . . .The caller hears the sound recorded by “Voice announce”. If it has
not been recorded, this is not displayed.
Press l( ) to play back a hold tone. Press r to end the demo
playback.
Information
The caller is charged for the call even while the call is on hold.
If a new call comes in while the current call is put on hold, the hold (Holding) is
released.
<Set Hold Tone>
Setting Hold Tone
Public Mode is an auto-answer service that puts importance on manners
in public spaces. Once you activate Public Mode, the guidance is played
back telling that you cannot answer the call as you are currently driving
or in a place (a train, bus, movie theater, etc.) where you should refrain
from answering the call. Then the call is disconnected.
Voice Mail Service
※1
, Call Forwarding Service
※1
, and Caller ID Display Request
Service
※2
are activated taking priority over Public Mode.
※1When you receive a voice call and the ring time is set to other than 0 seconds,
services are activated after Public Mode guidance.
※2When the other party notifies the phone number, Public Mode is activated.
When a voice call comes in from the other party whose phone number is rejected by
Nuisance Call Blocking Service, Public Mode is not activated.
1
Press and hold a for at least one second.
Public Mode is activated and “ ” is displayed.
When a call comes in, the guidance “The person you are calling is currently driving
or in an area where cell phone should not be used. Please try again later.” is played
back for incoming calls.
To deactivate Public Mode, perform the same operation. Then, Public Mode is
deactivated and “ ” disappears.
Using Public Mode
Using Public Mode (Drive Mode)
Information
You can activate/deactivate Public Mode only from the Stand-by display. You can
activate/deactivate Public Mode even when “ ” is displayed.
You can make calls as usual even during Public Mode.
If you make an emergency call at 110/119/118, Public Mode is released.
When Public Mode and Manner Mode are activated simultaneously, Public Mode has
priority.
If a “User unset” call comes in while “Caller ID request” is set to “Activate”, the Caller
ID Request guidance is played back. (The Public Mode guidance is not played back.)
You cannot use this function during data communication.