User's Manual Part 2
209
i-mode/i-motion/i-Channel/i-concier
You can set the host (APN) to use for receiving services other than
i-mode (DOCOMO).
If you change this setting, you will not be able to use i-mode.
1
ii-mode settingsHost selection
Highlight <Not recorded>and press l()
Enter your Terminal Security Code.
If you select a stored host, the setting is changed to the selected one.
To delete the stored host, press i( ), select “Delete”, enter your
Terminal Security Code, and then select “YES”.
2
Do the following operations.
3
Press l().
+m-8-1
<Host Selection>
Changing a Host from i-mode
(ISP Connection Communication)
※Normally, you do not need to change this setting.
Host name Enter a host name.
You can enter up to 9 full-pitch/18 half-pitch characters.
Host number Enter a host number.
You can enter up to 99 half-pitch alphanumeric characters.
Host address Enter a host address.
You can enter up to 30 half-pitch alphanumeric characters.
Host address 2 Enter a host address 2.
You can enter up to 30 half-pitch alphanumeric characters.
Information
If you set any other host than i-mode, Pake-Houdai, Pake-Houdai Full or Pake-Houdai
Double are not applied.
1
iOperate certificateCertificate
Highlight a certificate and press i()
Do the following operations.
Certificate . . . . . . . . . . . . Certificates issued by the authenticating company and stored
in the FOMA terminal at purchase.
DOCOMO Certificate . . . Certificates required for connecting to the FirstPass Center or
FirstPass sites; they are stored on the UIM (green/white).
User Certificate . . . . . . . . Certificates downloaded from the FirstPass Center by
selecting “Client certificate” from the i-mode menu; they are
stored on the UIM (green/white).
<SSL Certificate>
Operating SSL Certificates
Certificate info The subject name, author, validity period, and serial number of
the certificate are displayed.
You can check the certificate also by pressing Oo()
instead of i().
Valid/Invalid
The selected item is invalidated; then “ ” changes to “ ”.
When you select an invalid certificate, it will be validated.
If you set a certificate to invalid, you cannot display the sites with
that SSL certificate.
You cannot set “DOCOMO Cert 2” to “Invalid”.
Certificates used for SSL communication