User's Manual Part 2

310
i-αppli/i-Widget
Up to 30 logs of received i-αppli call are stored in i-αppli call logs. You
can check the reply state.
≥When more than 30 i-αppli calls are received, the older logs are automatically deleted.
However, the logs on holding i-αppli call are not deleted. (But they are deleted if all the
logs are the logs of on hold i-αppli call.)
1
m1i-αppli1iαppli call logs
: i-αppli call logs on holding (not replied)
: Replied with an accept i-αppli call logs
: Rejected i-αppli call logs
: Expired i-αppli call logs
≥Press Oo( ), highlight the log of i-αppli call on
holding, you can display the confirmation display of
i-αppli call again. (See “Receive i-αppli Call” on
page 309)
≥To delete the i-αppli call logs, press i( ) and select “Delete this” or
“Delete all” then select “YES”. If you select “Delete all”, you need to enter your
Terminal Security Code.
You can set whether to accept to start from i-αppli call for each i-αppli
program. If you set to “OFF”, you cannot receive i-αppli call to the set
i-αppli program.
1
Software list1i()1Software setting
1iαppli call1Select an item1l()
ON . . . . . . . . . . .Accept to start i-αppli program from i-αppli call.
OFF . . . . . . . . . .You cannot start i-αppli program from i-αppli call.
≥Even if you set to “OFF”, it might not valid depending on the i-αppli program.
Check i-αppli Call Logs
i-αppli call logs
display
Setting i-αppli Call
Software Setting (i-αppli Call)
You can set whether to reject the download notification of i-αppli
program when you do not have the i-αppli program intended to an i-αppli
call.
1
m1i-αppli1iαppli settings1iαppli call settings
1iαppli call DL set.1Reject or Not reject
You can set the operation when an i-αppli call is received.
1
m1i-αppli1iαppli settings1iαppli call settings
1iαppli call sound1Do the following operations.
i-αppli Call Download Setting
i-αppli Call Sound
Select ring tone 1Select a folder1Select a ring tone.
≥While selecting, the selected tone sounds for confirmation.
Ring time setting You can set a ring time for i-αppli call ring tone.
1Enter a ring time (seconds).
≥Enter two digits from “00” through “30”.
Select vibrator 1Select a vibration pattern.
≥If you select “Melody linkage”, the FOMA terminal vibrates in
time with ring tone.
≥While selecting, the FOMA terminal vibrates by the selected
pattern for confirmation.
Select illumination 1Select an item.
≥While selecting, the Call/Charging indicator lights/flickers for
confirmation.